벤조트리플루오라이드
벤조트라이플루오라이드 · 벤조트리플루오라이드 · 벤조트리플루오리드 · α,α,α-Trifluorotoluene · TRIFLUORO TOLUENE · A,A,A-TRIFLUOROTOLUENE · Benzotrifluoide · Triflorotoluene

식별자 및 물리적 특성
| CAS No. | 98-08-8 |
|---|---|
| 분자식 | C7H5F3 |
| 평균 분자량 | 146.11 g/mol |
| 단동위원소 질량 | 146.03433465 g/mol |
| SMILES | FC(F)(F)c1ccccc1 |
| InChIKey | GETTZEONDQJALK-UHFFFAOYSA-N |
| PubChem CID | 7368 |
| ChEMBL | CHEMBL15897 |
| ChEBI | CHEBI:36810 |
| EC No. | 202-635-0 |
| DTXSID | DTXSID2024589 |
| 현지명 | 벤조트리플루오라이드 |
화학 및 물리적 성질
| XLogP | 3 |
|---|---|
| 극성 표면적 | 0 |
| 수소 결합 공여자 수 | 0 |
| 수소 결합 수용자 수 | 3 |
| 회전 가능 결합 수 | 0 |
| 무거운 원자 수 | 10 |
| 형식 전하 | 0 |
| 복잡도 | 99 |
| 냄새 | AROMATIC ODOR향기로운 냄새 |
| 밀도 | 1.1812 at 77 °F (NTP, 1992) - Denser than waterwill sink1.1886 @ 20 °C1.189 @ 20°C1.19 g/mL at 20 °C(lit.) |
| Color/Form | WATER WHITE LIQUID |
| 용해도 | less than 1 mg/mL at 70 °F (NTP, 1992)SOL IN ALL PROPORTIONS IN ETHANOL, BENZENE, ETHER, ACETONEMiscible in n-heptane, carbon tetrachloride.Water solubility = 451.5 mg/L at 25 °C0.45g/l 가수분해 |
| 인화점 | 54 °F (NTP, 1992)54 °F (12 °C) (CLOSED CUP) |
| 끓는 점 | 208 to 210 °F at 760 mmHg (NTP, 1992)103.46 °C102.1 °C @760 [mm Hg]102 °C(lit.) |
| Decomposition | Decomposition may release hydrogen fluoride. |
| 녹는점 | -20.4 °F (NTP, 1992)-29.05 °CHeat of fusion at melting point = 1.3782X10+7 J/kmol-28.95 °C−29 °C(lit.) |
| 증기 밀도 | 5.04 (NTP, 1992) - Heavier than airwill sink (Relative to Air)5.04 (AIR=1) |
| 증기압 | 11 mmHg at 32 °F (NTP, 1992)38.8 [mmHg]Vapor pressure = 11 MM HG @ 0 °C38.83 mm Hg at 25 °C38.83 [mm Hg] @25 °C53 hPa (25 °C) |
| 굴절률 | INDEX OF REFRACTION: 1.41486 @ 13.3 °C/Dn20/D 1.414(lit.) |
| Physical Description | Benzotrifluoride appears as a clear colorless liquid with an aromatic odor. Flash point of 54 °F. Vapors are heavier than air. Insoluble in water and slightly denser than water. May be toxic by inhalation.[Hawley] |
| 저장 조건 | Store below +30°C. |
| 물리적 상태 | 액체 |
| 색상 | 무색의 |
| 비중 | 1.199 |
| 폭발한계 | 1.4-9.3%(V) |
| 용해도 | 21°C에서 <0.1g/100mL |
| 비열 | Cp(liquid): 1.29 J/(g·K), at 25℃ |
| Merck | 14,1110 |
| BRN | 1906908 |
| 헨리 상수 | 6.0×10-4 mol/(m3Pa) at 25℃, Duchowicz et al. (2020) |
| 유전율 | 39.0(20℃) |
| 안정성 | 안정적인. 가연성이 높습니다. 강한 산화제, 강염기, 강한 환원제와 호환되지 않습니다. |
| InChI | 1S/C7H5F3/c8-7(9,10)6-4-2-1-3-5-6/h1-5H |
| InChIKey | GETTZEONDQJALK-UHFFFAOYSA-N |
| SMILES | FC(F)(F)c1ccccc1 |
| LogP(분배 계수) | 3.01 at 20℃ |
| NIST | Benzene, (trifluoromethyl)-(98-08-8) |
| EPA | Benzotrifluoride (98-08-8) |
화학적 성질
Benzotrifluoride is a colorless to light yellow liquid, low viscosity liquid. Its polarity is intermediate between those of dichloromethane and ethyl acetate, and it is miscible with common organic solvents and able to dissolve many organic compounds. Benzotrifluoride is used in a wide variety of reactions including radical reactions, oxidations and reductions, phase-transfer reactions, transition metal catalyzed processes andLewis acid reactions.
안전 및 규제
| GHS 분류 | DangerH225: Highly Flammable liquid and vapor [Danger Flammable liquids]H411: Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard]P210, P233, P240, P241, P242, P243, P273, P280, P303+P361+P353, P370+P378, P391, P403+P235, and P501 (click each P-code to see the statement) |
|---|---|
| 규제 정보 | Status: Active Update: 05-03-2021 https://echa.europa.eu/registration-dossier/-/registered-dossier/29639Status: Active Update: 16-10-2019 https://echa.europa.eu/registration-dossier/-/registered-dossier/29713Benzene, (trifluoromethyl)-: Does not have an individual approval but may be used under an appropriate group standardThe New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.) |
| 운송 라벨(DOT) | Flammable Liquid |
| 화재 위험 | Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]:HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. CAUTION: Ethanol (UN1170) can burn with an invisible flame. Use an alternate method of detection (thermal camera, broom handle, etc.) Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along the ground and collect in low or confined areas (sewers, basements, tanks, etc.). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids will float on water. (ERG, 2024)· HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.CAUTION: Ethanol (UN1170) can burn with an invisible flame. Use an alternate method of detection (thermal camera, broom handle, etc.)· Vapors may form explosive mixtures with air.· Vapors may travel to source of ignition and flash back.· Most vapors are heavier than air. They will spread along the ground and collect in low or confined areas (sewers, basements, tanks, etc.).· Vapor explosion hazard indoors, outdoors or in sewers.· Those substances designated with a (P) may polymerize explosively when heated or involved in a fire.· Runoff to sewer may create fire or explosion hazard.· Containers may explode when heated.· Many liquids will float on water. |
| 건강 유해성 | Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]:Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or asphyxiation, especially when in closed or confined areas. Runoff from fire control or dilution water may cause environmental contamination. (ERG, 2024)· Inhalation or contact with material may irritate or burn skin and eyes.· Fire may produce irritating, corrosive and/or toxic gases.· Vapors may cause dizziness or asphyxiation, especially when in closed or confined areas.· Runoff from fire control or dilution water may cause environmental contamination. |
| 유해성 요약 | May cause irritation or burns to skin and eyes[CAMEO] An irritantEffects in high-dose animal studies include general anesthesia[MSDSonline] |
| 운송 번호 및 가이드(DOT) | 2338 127 |
| 반응성 그룹 | Fluorinated Organic Compounds |
| Reactivity Alerts | Highly Flammable |
| Reactivity Profile | BENZOTRIFLUORIDE may react with oxidizing materials, strong bases and reducing agents. (NTP, 1992) |
| DOT Emergency Guidelines | /GUIDE 127: FLAMMABLE LIQUIDS (Polar/Water-Miscible)/ Fire or Explosion: HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water./GUIDE 127: FLAMMABLE LIQUIDS (Polar/Water-Miscible)/ Health: Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control may cause pollution./GUIDE 127: FLAMMABLE LIQUIDS (Polar/Water-Miscible)/ Public Safety: CALL Emergency Response Telephone Number on Shipping Paper first. If Shipping Paper not available or no answer, refer to appropriate telephone number listed on the inside back cover. As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. Keep unauthorized personnel away. Stay upwind. Keep out of low areas. Ventilate closed spaces before entering./GUIDE 127: FLAMMABLE LIQUIDS (Polar/Water-Miscible)/ Protective Clothing: Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters' protective clothing will only provide limited protection.For more DOT Emergency Guidelines (Complete) data for BENZOTRIFLUORIDE (8 total), please visit the HSDB record page. |
| DOT Hazard Classification | BenzotrifluorideUN2338Class 3 Flammable and combustible liquid (49 eCFR § 173.120)PG II: the degree of danger presented by the material is mediumFor more information about the packing group assignment, please visit 49 eCFR § 173 |
| Air and Water Reactions | Highly flammable. Insoluble in water. |
| 소화 | Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]:CAUTION: The majority of these products have a very low flash point. Use of water spray when fighting fire may be inefficient. CAUTION: For fire involving UN1170, UN1987 or UN3475, alcohol-resistant foam should be used. CAUTION: Ethanol (UN1170) can burn with an invisible flame. Use an alternate method of detection (thermal camera, broom handle, etc.).SMALL FIRE: Dry chemical, CO2, water spray or alcohol-resistant foam.LARGE FIRE: Water spray, fog or alcohol-resistant foam. Avoid aiming straight or solid streams directly onto the product. If it can be done safely, move undamaged containers away from the area around the fire.FIRE INVOLVING TANKS, RAIL TANK CARS OR HIGHWAY TANKS: Fight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks in direct contact with flames. For massive fire, use unmanned master stream devices or monitor nozzlesif this is impossible, withdraw from area and let fire burn. (ERG, 2024) |
| 누출 비상 조치 | · CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.· Keep unauthorized personnel away.· Stay upwind, uphill and/or upstream.· Ventilate closed spaces before entering, but only if properly trained and equipped.· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.· All equipment used when handling the product must be grounded.· Do not touch or walk through spilled material.· Stop leak if you can do it without risk.· Prevent entry into waterways, sewers, basements or confined areas.· A vapor-suppressing foam may be used to reduce vapors.· Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers.· Use clean, non-sparking tools to collect absorbed material.Large Spill· Dike far ahead of liquid spill for later disposal.· Water spray may reduce vapor, but may not prevent ignition in closed spaces. |
| 응급 처치 | EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.INHALATION: IMMEDIATELY leave the contaminated areatake deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be usedif not available, use a level of protection greater than or equal to that advised under Protective Clothing.INGESTION: DO NOT INDUCE VOMITING. Corrosive chemicals will destroy the membranes of the mouth, throat, and esophagus and volatile chemicals have a high risk of being aspirated into the victim's lungs during vomiting. Thus, the risk of increasing the medical problems by inducing vomiting of a volatile corrosive chemical is very high. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)General First Aid:· Call 911 or emergency medical service.· Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.· Move victim to fresh air if it can be done safely.· Administer oxygen if breathing is difficult.· If victim is not breathing:-- DO NOT perform mouth-to-mouth resuscitationthe victim may have ingested or inhaled the substance.-- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).-- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.· Remove and isolate contaminated clothing and shoes.· For minor skin contact, avoid spreading material on unaffected skin.· In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.· For severe burns, immediate medical attention is required.· Effects of exposure (inhalation, ingestion, or skin contact) to substance may be delayed.· Keep victim calm and warm.· Keep victim under observation.· For further assistance, contact your local Poison Control Center.· Note: Basic Life Support (BLS) and Advanced Life Support (ALS) should be done by trained professionals.Specific First Aid:· Wash skin with soap and water. |
| Firefighting Hazards | Vapors are heavier than air and may travel to a source of ignition and flash back. |
| 노출 관리 및 개인 보호 | · Wear positive pressure self-contained breathing apparatus (SCBA).· Structural firefighters' protective clothing provides thermal protection but only limited chemical protection. |
| 소화 절차 | If material on fire or involved in fire: Do not extinguish fire unless flow can be stopped or safely confined. Use water in flooding quantities as fog. Solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Use foam, dry chemical, or carbon dioxide. Keep run-off water out of sewers and water sources.Use water spray, dry chemical, foam, or carbon dioxide. Water may be ineffective. Approach fire from upwind to avoid hazardous vapors and toxic decomposition products. Use water spray to keep fire-exposed containers cool. |
| 보관 조건 | Store in a cool, dry, well-ventilated location. Inside storage should be in a standard flammable liquids storage warehouse, room, or cabinet. Separate from oxidizing materials....ACID & ACID FUME SENSITIVE MATERIALS...ARE MATERIALS WHICH REACT WITH ACID & ACID FUMES TO EVOLVE HEAT, HYDROGEN, & FLAMMABLE &/OR EXPLOSIVE GASES...THEREFORE...ACIDS SHOULD NOT BE STORED...CLOSE...TO /BENZOTRIFLUORIDE/. |
| 비화재 누출 대응 | Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]:ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area. All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean, non-sparking tools to collect absorbed material.LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2024) |
| 처리 방법 | SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices. |
| Preventive Measures | If material not on fire and not involved in fire: Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Attempt to stop leak if without undue personnel hazard. Use water spray to knock-down vapors.Personnel protection: Avoid breathing vapors. Keep upwind. ... Do not handle broken packages unless wearing appropriate personal protective equipment. If contact with the material anticipated, wear appropriate chemical protective clothing.Evacuation: If material leaking (not on fire) consider evacuation from downwind area based on amount of material spilled, location and weather conditions. |
| Isolation and Evacuation | Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]:IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area for at least 50 meters (150 feet) in all directions.LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet).FIRE: If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directionsalso, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2024)Immediate precautionary measure· Isolate spill or leak area for at least 50 meters (150 feet) in all directions.· Consider initial downwind evacuation for at least 300 meters (1000 feet).· If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directionsalso, consider initial evacuation for 800 meters (1/2 mile) in all directions. |
| Protective Action Criteria (PAC) | 47 [mg/m3]520 [mg/m3]3100 [mg/m3] |
| 환경 거동 | TERRESTRIAL FATE: Based on a recommended classification scheme(1), an estimated Koc value of 1030(SRC), determined from an experimental log Kow(2) and a recommended regression-derived equation(3), indicates that benzotrifluoride will have low mobility in soil(SRC). Volatilization of benzotrifluoride may be important from moist soil surfaces(SRC) given an estimated Henry's Law constant of 0.017 atm-cu m/mole(SRC), calculated from experimental values of vapor pressure(4) and water solubility(5), and from dry soil surfaces(SRC) based on an experimental vapor pressure of 38.83 mm Hg(4). Benzotrifluoride will not be susceptible to direct photolysis on soil surfaces based upon its lack of absorption of light at wavelengths >290 nm(6). Biodegradation of benzotriflouride will not be an important fate process in soil according to two aqueous biodegradation tests(7).AQUATIC FATE: Based on a recommended classification scheme(1), an estimated Koc value of 1030(SRC), determined from an experimental log Kow(2) and a recommended regression-derived equation(3), indicates that benzotrifluoride may adsorb to suspended solids and sediment(SRC) in water. Benzotrifluoride may volatilize from water surfaces based on an estimated Henry's Law constant of 0.017 atm-cu m/mole(SRC), calculated from experimental values of vapor pressure(4) and water solubility(5). Estimated half-lives for a model river and model lake are 3.6 hours and 4.8 days, respectively(3,SRC). Experimental BCF values of 26-54 and 31-58(7) suggest that benzotrifluoride will bioconcentrate in aquatic organisms(SRC) according to a classification scheme(6). Benzotrifluoride will not be susceptible to direct photolysis on water surfaces based upon its lack of absorption of light at wavelengths >290 nm(8). Biodegradation will not be an important fate process in water based on two biodegradation tests(9).ATMOSPHERIC FATE: According to a suggested classification scheme(1), an experimental vapor pressure of 38.83 mm Hg at 25 °C(2,SRC) indicates that benzotrifluoride will exist in the vapor phase in the ambient atmosphere. Vapor-phase benzotrifluoride is degraded in the atmosphere by reaction with photochemically produced hydroxyl radicals(3)the half-life for this reaction in air is estimated to be about 35 days(3,SRC). Vapor-phase benzotrifluoride is also degraded in the atmosphere by reaction with ozone(4)the half-life for this reaction in air is estimated to be about 6.3 years(4,SRC). Particulate-phase benzotrifluoride may be physically removed from the air by wet and dry deposition(SRC). Benzotrifluoride will not be susceptible to direct photolysis based upon its lack of absorption of light at wavelengths >290 nm(5). |
| 유해 작용 | Neurotoxin - Acute solvent syndromeDermatotoxin - Skin burns. |
| Effluent Concentrations | Benzotrifluoride was detected in Bloody Run Creek water (downstream from the Hyde Park landfill) in Niagara Falls, NY at a level of 0.1-1 ppb or in sediment at a level of 0.5-2 ppm(1). Benzotrifluoride has been detected in one out of 63 industrial effluent samples taken from Ohio, West Virginia, Pennsylvania, New Jersey, New York, Louisiana, Kentucky, Delaware, and Texas at a concentration less than 10 ug/L(2). |
| Soil Adsorption/Mobility | The Koc of benzotrifluoride is estimated as approximately 1030(SRC), using an experimental log Kow of 3.01(1) and a regression-derived equation(2,SRC). According to a recommended classification scheme(3), this estimated Koc value suggests that benzotrifluoride has low mobility in soil(SRC). |
| Human Toxicity Excerpts | TOXIC BY INHALATION. |
| Artificial Pollution Sources | Benzotrifluoride's production and use in dye chemistry(1), high polymer chemistry(1), as a solvent(2), dielectric fluid(2), vulcanizing agent(2), insecticide(2), and as an intermediate for pharmaceuticals(2), may result in its release to the environment through various waste streams(SRC). |
| Environmental Biodegradation | Two four-week biodegradation studies using 2 mg/L sludge and benzotrifluoride concentrations of 2.4 and 11.9 mg/L gave theoretical BODs of 0%(1). |
| Environmental Bioconcentration | An estimated BCF value of 110 was calculated for benzotrifluoride(SRC), using an experimental log Kow of 3.01(1) and a recommended regression-derived equation(2). Bioconcentration factors determined from a six week study in carp using 100 and 10 ug/L benzotrifluoride were 26-54 and 31-58, respectively(3). According to a classification scheme(4), these BCF values suggest that bioconcentration in aquatic organisms will be an important fate process(SRC). |
| Volatilization from Water/Soil | The Henry's Law constant for benzotrifluoride is estimated as 0.017 atm-cu m/mole(SRC) from its experimental values for vapor pressure, 38.83 mm Hg(1), and water solubility, 451 mg/l(2). This value indicates that benzotrifluoride will volatilize rapidly from water surfaces(3,SRC). Based on this Henry's Law constant, the volatilization half-life from a model river (1 m deep, flowing 1 m/sec, wind velocity of 3 m/sec) is estimated as approximately 3.6 hours(3,SRC). The volatilization half-life from a model lake (1 m deep, flowing 0.05 m/sec, wind velocity of 0.5 m/sec) is estimated as approximately 4.8 days(3,SRC). Benzotrifluoride's high vapor pressure(1) and high Henry's Law constant(1,2,SRC) indicate that volatilization from dry and moist soil may occur(SRC). |
| Non-Human Toxicity Excerpts | Moderate toxic by animal-experimenteffective to central nervous system. |
| Environmental Abiotic Degradation | The rate constant for the vapor-phase reaction of benzotrifluoride with photochemically produced hydroxyl radicals has been experimentally determined to be 4.6X10-13 cu cm/molecule-sec at 25 °C(1). This corresponds to an atmospheric half-life of about 35 days at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1,SRC). The rate constant for the vapor-phase reaction of benzotrifluoride with ozone has been experimentally determined to be less than 5X10-21 cu cm/molecule-sec at 25 °C(2). This corresponds to an atmospheric half-life of about 6.3 years at an atmospheric concentration of 7X10+11 ozone molecules per cu cm(2,SRC). Benzotrifluoride will not be susceptible to direct photolysis based upon its lack of absorption of light at wavelengths >290 nm(3). |
| Environmental Water Concentrations | SURFACE WATER: Benzotrifluoride has been qualitatively identified in the Niagara River(1). |
| 수질 위해 등급(WGK) | 3 |
| TSCA 등재 상태 | TSCA listed |
| RTECS 번호 | XT9450000 |
| 운송 번호(UN) | UN 2338 |
| 독성 | LD50 orally in Rabbit: 15000 mg/kg LD50 dermal Rat > 2000 mg/kg |
| 관세 코드 | 29049090 |
| 위험 문구(R) | 45-46-11-36/38-48/23/24/25-65-51/53-39/23/24/25-23/24/25-48/20/22-40-38-22 |
| 위험 표시 | F,T,C,N,Xn |
| 안전 문구(S) | 53-26-36/37-45-62-61-23-16 |
| 포장분류 | II |
| 위험 등급 | 3Acute Tox. 3 InhalationAcute Tox. 4 OralCarc. 2Eye Irrit. 2Repr. 2Skin Irrit. 2STOT RE 1 OralSTOT SE 3 |
| 기존화학 물질 | 2015-3-7034 |
| 위험 참고 사항 | Flammable/Corrosive |
| 자연 발화 온도 | 650 °C |
| 저장 분류 | 6.1D - Non-combustible acute toxic Cat.3toxic hazardous materials or hazardous materials causing chronic effects |
| 유해 물질 데이터 | 98-08-8(Hazardous Substances Data) |
용도
용도
Benzotrifluoride is a useful alternative solvent for organic reactions currently conducted in dichloromethane and related solvents.
일반 설명
A clear colorless liquid with an aromatic odor. Flash point of 54°F. Vapors are heavier than air. Insoluble in water and slightly denser than water. May be toxic by inhalation.