1,2,3,6-테트라히드로벤즈알데히드

Other Classes -> Benzaldehydes

Flammable agents - 2nd degree

Soluble in acetone and methanol, slightly soluble in cabon tetrachloride.

Slightly soluble in water.

135 °F (NFPA, 2010)

57 °C

135 °F (57 °C) (OPEN CUP)

1,2,3,6-tetrahydrobenzaldehyde appears as a colorless liquid. Less dense than water and slightly soluble in water. Hence floats on water. Irritates skin, eyes and mucous membranes. Used to make fabrics water resistant, and to make other chemicals.

Liquid; [HSDB] Colorless to yellow liquid with an almond-like odor; [MSDSonline]

Freezing point = -100 °C

Wt/gal = 8.1 lbs at 20 °C

Danger

H226 (100%): Flammable liquid and vapor [Warning Flammable liquids]

P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P305+P354+P338, P317, P319, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 52 reports by companies from 11 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Chemical: 3-Cyclohexene-1-carboxaldehyde

Status: Active Update: 19-10-2021 https://echa.europa.eu/registration-dossier/-/registered-dossier/17258

3-Cyclohexene-1-carboxaldehyde: Does not have an individual approval but may be used under an appropriate group standard

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:

· HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:

· May cause toxic effects if inhaled or absorbed through skin.

Section 8(a) of TSCA requires manufacturers of this chemical substance to report preliminary assessment information concerned with production, use, and exposure to EPA as cited in the preamble in 51 FR 41329.

Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. 3-cyclohexene-1-carboxaldehyde is included on this list.

1,2,3,6-TETRAHYDROBENZALDEHYDE is an aldehyde. Aldehydes are frequently involved in self-condensation or polymerization reactions. These reactions are exothermic; they are often catalyzed by acid. Aldehydes are readily oxidized to give carboxylic acids. Flammable and/or toxic gases are generated by the combination of aldehydes with azo, diazo compounds, dithiocarbamates, nitrides, and strong reducing agents. Aldehydes can react with air to give first peroxo acids, and ultimately carboxylic acids. These autoxidation reactions are activated by light, catalyzed by salts of transition metals, and are autocatalytic (catalyzed by the products of the reaction). The addition of stabilizers (antioxidants) to shipments of aldehydes retards autoxidation.

/GUIDE 129: FLAMMABLE LIQUIDS (Polar/Water-Miscible/Noxious)/ Fire or Explosion: HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.

/GUIDE 129: FLAMMABLE LIQUIDS (Polar/Water-Miscible/Noxious)/ Health: May cause toxic effects if inhaled or absorbed through skin. Inhalation or contact with material may irritate or burn skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution.

/GUIDE 129: FLAMMABLE LIQUIDS (Polar/Water-Miscible/Noxious)/ Public Safety: CALL Emergency Response Telephone Number on Shipping Paper first. If Shipping Paper not available or no answer, refer to appropriate telephone number listed on the inside back cover. As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions. Keep unauthorized personnel away. Stay upwind. Keep out of low areas. Ventilate closed spaces before entering.

/GUIDE 129: FLAMMABLE LIQUIDS (Polar/Water-Miscible/Noxious)/ Protective Clothing: Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters' protective clothing will only provide limited protection.

For more DOT Emergency Guidelines (Complete) data for 3-CYCLOHEXENE-1-CARBOXALDEHYDE (8 total), please visit the HSDB record page.

1,2,3,6-Tetrahydrobenzaldehyde

UN2498

Class 3 Flammable and combustible liquid (49 eCFR § 173.120)

PG III: the degree of danger presented by the material is minor

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:

General First Aid:

If material on fire or involved in fire: Do not extinguish fire unless flow can be stopped or safely confined. Use water in flooding quantities as fog. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Solid streams of water may be ineffective. Use "alcohol" foam, dry chemical or carbon dioxide.

SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.

If material not on fire and not involved in fire: Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary.

Personnel protection: Avoid breathing vapors. Keep upwind. Avoid bodily contact with the material. ... Do not handle broken packages unless wearing appropriate personal protective equipment. Wash away any material which may have contacted the body with copious amounts of water or soap and water. If contact with the material anticipated, wear appropriate chemical protective clothing.

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:

Immediate precautionary measure

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:

Personnel protection: ... Wear appropriate chemical protective gloves, boots, and goggles.

The mucus membranes of the nasal and oral passages and the upper respiratory tract are affected, producing a burning sensation ... bronchial constriction, choking, and coughing. The eyes tear, and a burning sensation is noted on the skin of the face. /Aldehydes/

Study was conducted to determine if HCHO pretreatment would cause sensory irritation cross tolerance to other inhaled aldehydes. Male F-344 rats, weighing 190 to 210 g, were pretreated with 15 ppm HCHO, 6 hr/day for 9 days, and challenged on the 10th day with a saturated (acetaldehyde, propionaldehyde, and butyraldehyde), unsaturated (acrolein and crotonaldehyde), or cyclic (cyclohexanecarboxaldehyde, 3-cyclohexene-1-carboxaldehyde, and benzaldehyde) aldehyde. The sensory irritation response in these animals was quantified by measuring respiratory rate depression in a head-only inhalation chamber in naive (nonpretreated) animals, the concentration eliciting a 50% decrease in respiratory rate (RD50) was 23 ppm or less for unsaturated aliphatic aldehydes. For cyclic and saturated aliphatic aldehydes, the RD50 ranged from 600 to 1000 ppm and 3000 to 6800 ppm, respectively. Formaldehyde pretreatment resulted in cross tolerance only with acetaldehyde (RD50 increased 3.5-fold) and acrolein (RD50 increased 5-fold the development of cross tolerance following HCHO pretreatment is not a general phenomenon.

Section 8(a) of TSCA requires manufacturers of this chemical substance to report preliminary assessment information concerned with production, use, and exposure to EPA as cited in the preamble in 51 FR 41329.

Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. 3-cyclohexene-1-carboxaldehyde is included on this list.

Aldehydes are readily oxidized to organic acids, which, in turn, can serve as substrates for fatty acid oxidation pathways and the Krebs cycle. ... Oxidation of aldehydes is catalyzed by aldehyde dehydrogenase, which has been found in the brain, erythrocytes, liver, kidney, heart, and placenta. /Aldehydes/

... The detoxification of aldehydes can be seen to proceed basically via two routes: (1) an oxidation to yield readily metabolized acids; (2) inactivation by reaction with sulfhydryl groups, particularly glutathione. Under conditions that either deplete glutathione levels, or that result in an inhibition of aldehyde dehydrogenase (for example, Antabuse treatment), the acute and chronic effects of aldehyde toxicity might be more fully expressed. /Aldehydes/

Used as a chemical intermediate (epoxides used in electrical insulator manufacturing) and agent for improving textile water resistance; [HSDB]

Textiles (Fiber & Fabric Manufacturing) [Category: Industry]

CHEM INT FOR EPOXIDES USED IN ELECTRICAL INSULATOR MFR; FOR 3-CYCLOHEXENE-1,1-DIMETHANOL; FOR CYCLOALIPHATIC EPOXY RESINS; AGENT FOR IMPROVING TEXTILE WATER RESISTANCE-POSSIBLE USE

Intermediate, improves water resistance of textiles.

(1981) PROBABLY GREATER THAN 2.27X10+6 GRAMS

(1982) PROBABLY GREATER THAN 2.27X10+6 GRAMS