돌아가기
Huagongshe화공사 화학 정보 인쇄 보고서 · 연구 참고용
HCID 7963생성일: 2026년 10월 26일

γ-피콜린

4-메틸파이리딘 · 4-피콜린 · γ-피콜린 · 4-PICOLINE · GAMMA-PICOLINE · γ-Picoline · Gama picoline sulfate · GAMMAP

https://huagongshe.com/ko/chemical/7963

γ-피콜린 분자 구조식

식별자 및 물리적 특성

CAS No.108-89-4
분자식C6H7N
평균 분자량93.13 g/mol
단동위원소 질량93.05784922 g/mol
SMILESCc1ccncc1
InChIKeyFKNQCJSGGFJEIZ-UHFFFAOYSA-N
PubChem CID7963
ChEMBLCHEMBL15544
ChEBICHEBI:32547
EC No.203-626-4
DTXSIDDTXSID4021892
현지명γ-피콜린

화학 및 물리적 성질

XLogP1.2
극성 표면적12.9
수소 결합 공여자 수0
수소 결합 수용자 수1
회전 가능 결합 수0
무거운 원자 수7
형식 전하0
복잡도46.1
물질 분류Nitrogen Compounds -> Pyridines
SpringerMaterials Properties15N nuclear magnetic resonance spectrum
LogP(분배 계수)log Kow = 1.22
냄새Obnoxious, sweetish odor불쾌함, 달콤함
밀도0.9548 at 68 °F (NTP, 1992) - Less dense than waterwill float0.9548 g/cu cm at 20 °CRelative density (water = 1): 0.960.957 g/mL at 25 °C (lit.)
향미제EU Flavoring substances
Color/FormColorless liquid
용해도Miscible with water at 20 °CSoluble in alcohol, etherSoluble in acetone, carbon tetrachlorideSolubility in water: miscible알코올에 용해됨(lit.)
인화점134 °F (NTP, 1992)57 °C134 °F (57 °C) (Open cup)39 °C (102 °F) (Closed cup)57 °C o.c.
끓는 점292.8 °F at 760 mmHg (NTP, 1992)145 °C at 760 mm Hg144-145 °C145 °C (lit.)
DecompositionWhen heated to decomposition it emits toxic fumes of /nitrogen oxides/.
녹는점38.5 °F (NTP, 1992)3.68 °C3.7 °C2.4 °C (lit.)
증기 밀도3.2 (vs air)
증기압4 mm Hg ( 20 °C)
굴절률n20/D 1.504(lit.)
저장 조건Store below +30°C.
물리적 상태액체
pKa(산도 계수)6.02(at 20℃)
색상맑은 연한 노란색
폭발한계1.3-8.7%(V)
용해도녹는
비열Cp(liquid): 1.71 J/(g·K), at 25℃
Merck14,7402
BRN104586
헨리 상수1.6×100 mol/(m3Pa) at 25℃, Brockbank (2013)
유전율12.279999999999999
InChI1S/C6H7N/c1-6-2-4-7-5-3-6/h2-5H,1H3
InChIKeyFKNQCJSGGFJEIZ-UHFFFAOYSA-N
SMILESCc1ccncc1
LogP(분배 계수)1.22 at 25℃
NISTPyridine, 4-methyl-(108-89-4)
EPA4-Methylpyridine (108-89-4)

화학적 성질

4-Methylpyridine is a Colorless to light yellow liquid with an obnoxious, sweetish odor. soluble in water, ethanol and ether.

안전 및 규제

GHS 분류DangerH226: Flammable liquid and vapor [Warning Flammable liquids]P210, P233, P240, P241, P242, P243, P261, P262, P264, P264+P265, P270, P271, P280, P301+P317, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P316, P317, P319, P321, P330, P332+P317, P337+P317, P361+P364, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)This chemical does not meet GHS hazard criteria for 8.2% (36 of 439) of reports.H226 (91.6%): Flammable liquid and vapor [Warning Flammable liquids]
규제 정보Chemical: Pyridine, 4-methyl-Commission Regulation (EC) No 1565/2000 (Repealed by Com. Implementing Reg. (EU) No 872/2012)Pyridine, 4-methyl- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Pyridine, 4-methyl- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)Status: Active Update: 03-10-2022 https://echa.europa.eu/registration-dossier/-/registered-dossier/239054-Methylpyridine: Does not have an individual approval but may be used under an appropriate group standard
운송 라벨(DOT)Flammable Liquid
화재 위험Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:Flammable. Gives off irritating or toxic fumes (or gases) in a fire. Above 57 °C explosive vapour/air mixtures may be formed.
화재 가능성Moderate fire risk.
건강 유해성ACUTE/CHRONIC HAZARDS: Moderate fire risk. (NTP, 1992)
유해성 요약A corrosive substance that can cause injury to the skin, eyes, and respiratory tractInhalation of high concentrations can cause unconsciousnessThe liquid defats the skin[ICSC] An irritantCan be absorbed through skin[MSDSonline] An irritant that can cause CNS depressionLiver changes occur in rats exposed to chronic high doses[AIHA] See Pyridine.
반응성 그룹Amines, Phosphines, and Pyridines
EC 분류Symbol: TR: 10-20/22-24-36/37/38S: (1/2)-26-36-45
UN 분류UN Hazard Class: 3UN Pack Group: III
TSCA 요건Pursuant to section 8(d) of TSCA, EPA promulgated a model Health and Safety Data Reporting Rule. The section 8(d) model rule requires manufacturers, importers, and processors of listed chemical substances and mixtures to submit to EPA copies and lists of unpublished health and safety studies. 4-Methylpyridine is included on this list. Effective date: 09/10/84Sunset date: 09/10/94.
Reactivity AlertsHighly Flammable
Reactivity Profile4-METHYL PYRIDINE neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.
소화This compound is not very flammable but any fire involving this compound may produce dangerous vapors. You should evacuate the area. All firefighters should wear full-body protective clothing and use self-contained breathing apparatuses. You should extinguish any fires involving this chemical with a dry chemical, carbon dioxide, foam, or halon extinguisher. (NTP, 1992)Use water spray, powder, alcohol-resistant foam, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water.
응급 조치Fresh air, rest. Refer for medical attention.Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention .First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.Rinse mouth. Do NOT induce vomiting. Rest. Refer for medical attention .
응급 처치EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
안전 보관Fireproof. Separated from strong oxidants. Well closed.
Firefighting HazardsSpecial hazards arising from the substance or mixture: Carbon oxides, nitrogen oxides (NOx).
소화 절차To fight fire, use alcohol foam.Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.Advice for firefighters: Wear self contained breathing apparatus for fire fighting if necessary.Use water spray to cool unopened containers.If material on fire or involved in fire: Do not extinguish fire unless flow can be stopped. Use water in flooding quantities as fog. Solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use "alcohol" foam, dry chemical, or carbon dioxide. /Picolines/
보관 조건Conditions for safe storage, including any incompatibilities: Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
정리 방법Accidental Release Measures. Personal precautions, protective equipment and emergency procedures: Wear respiratory protection. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapors accumulating to form explosive concentrations. Vapors can accumulate in low areas. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Methods and materials for containment and cleaning up: Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations.
비화재 누출 대응SMALL SPILLS AND LEAKAGE: If you should spill this chemical, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with acetone followed by washing with a strong soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
처리 방법SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air qualitypotential migration in soil or watereffects on animal and plant lifeand conformance with environmental and public health regulations.Waste treatment methods. Product: Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Contaminated packaging: Dispose of as unused product.
누출 처리Personal protection: chemical protection suit including self-contained breathing apparatus. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
Preventive MeasuresSRP: The scientific literature for the use of contact lenses by industrial workers is inconsistent. The benefits or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.Precautions for safe handling: Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic charge.Appropriate engineering controls: Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.For more Preventive Measures (Complete) data for 4-METHYLPYRIDINE (6 total), please visit the HSDB record page.
상호 작용The relationship between the mutagenicity of cobalt (II) heteroaromatic base complex and the strength of their coordinate bonds was examined ... . The mutagenicity of cobalt(II) chloride was studied in Salmonella test strains (TA-1537), (TA-2637), (TA-97a), and (TA-100) in combination with 4-substituted pyridines. The mixtures were divided into three groups based on spectral evidence of lowest relative strength of coordinate bonding (first group), intermediate strength bonding (second group), and highest strength bonding (third group). The first group of pyridine compounds included pyridine ... 4-methylpyridine, 4-ethylpyridine, 4-chloropyridine, and 4-bromopyridine. With these compounds cobalt (II) chloride demonstrated weak to marginal mutagenicity in (TA-1537), and/or (TA-2637), but not in (TA-98) or (TA-100). ... The second group of compounds included 4-aminopyridine and 4-dimethylaminopyridine. Equimolar mixtures of cobalt (II) chloride with these compounds was not mutagenic. The third group included 4-cyanopyridine ... . Equimolar mixtures of cobalt (II) chloride and ... /this/ compound /was/ not mutagenic. The only mixtures of cobalt (II) chloride and pyridines which demonstrated muagenicity in strains (TA-1537) and/or (TA-2637) were those which showed spectral evidence of only a moderate interaction between the metal cation and the pyridine derivatives. The maximum mutagenicity was noted when the mixture was equimolar.
생태독성 수치LC50Species: Pimephales promelas (fathead minnow)Conditions: flow-through bioassay with measured concentrations, 24.7 °C, dissolved oxygen 7.1 mg/L, hardness 45.0 mg/L CaCO3, alkalinity 524 mg/L CaCO3, and pH 7.66Concentration: 403 mg/L for 96 hr (confidence limit: 351-464 mg/L)EC50Concentration: <220 mg/L for 96 hr (confidence limit not reliable)Effect: loss of equilibriumSpecies: Cyprinodon variegatus (Sheepshead minnow)Conditions: flow throughConcentration: 400 mg/L for 96 hrSpecies: Tetrahymena pyriformis (Ciliate) GL-C strainConditions: freshwater, static, 28 °CConcentration: 731040 ug/L for 60 hr (95% confidence interval: 583620-959590 ug/L)Effect: population, decreased population growth rate />95% purity/
환경 거동TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 115(SRC), determined from a structure estimation method(2), indicates that 4-methylpyridine is expected to have high mobility in soil(SRC). The pKa of 4-methylpyridine is 5.98(3), indicating that this compound will exist partially in cation form in the environment and cations generally adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Soil studies with 2-methylpyridine(5), a compound expected to have similar sorption properties as 4-methylpryidine(SRC), demonstrated that Koc can vary with pH with lowest adsorption occurring in the non-ionized form(5). Volatilization of 4-methylpyridine from moist soil surfaces is expected to be an important fate process(SRC) given a Henry's Law constant of 6.0X10-6 atm-cu m/mole(6). 4-Methylpyridine is expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 5.77 mm Hg at 25 °C(7). 4-Methylpyridine may biodegrade fairly rapidly in aerobic soilhowever, under anaerobic conditions, this compound is expected to be persistent(8,9). 71.7 and 100% of the available nitrogen was released as inorganic nitrogen within 16 and 32 days following the incubation of 4-methylpyridine in aerobic Fincastle silt loam(7). 4-Methylpyridine added to an unpolluted surface soil under denitrifying or sulfidogenic conditions was 40 to 50% degraded in 3 months(8). Acclimation of microbes may be important as demonstrated by complete degradation of 4-methylpyridine in 2 weeks in polluted soil versus 3 months in unpolluted soil(9).AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 115(SRC), determined from a structure estimation method(2), indicates that 3-methylpyridine is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon a Henry's Law constant of 6.0X10-6 atm-cu m/mole(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 6 and 47 days, respectively(SRC). According to a classification scheme(5), an estimated BCF of 3(SRC), from its log Kow of 1.22(6) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is low(SRC). 4-Methylpyridine may biodegrade fairly rapidly in aerobic watershowever, under anaerobic conditions, this compound is expected to be persistent. Complete biodegradation of 4-methylpyridine was reported in 2 to 4 days following incubation in acclimated natural waters(7). No biodegradation was reported over 200 days when 4-methylpyridine was incubated in sulfidogenic estuarine sediment(8). 4-Methylpyridine is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(3). The UV absorption spectrum of 4-methylpyridine in aqueous solution shows no absorption >290 nm(9)therefore, 4-methylpyridine is not expected to be susceptible to direct photolysis by sunlight(SRC).ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 4-methylpyridine, which has a vapor pressure of 5.77 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 4-methylpyridine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC)the half-life for this reaction in air is estimated to be 6 days(SRC), calculated from its rate constant of 2.69X10-12 cu cm/molecule-sec at 25 °C(3). The UV absorption spectrum of 4-methylpyridine in aqueous solution shows no absorption >290 nm(4)
식품 조사 수치4-Methylpyridine was identified as a volatile component of fried bacon(1). 4-Methylpyridine is reported in pork meat volatiles(2).
유해 작용Neurotoxin - Other CNS neurotoxin
노출 경로The substance can be absorbed into the body by inhalation, through the skin and by ingestion.
독성 요약IDENTIFICATION AND USE: 4-Methylpyridine is a colorless liquid with an obnoxious, sweetish odor. It is used as a solvent in synthesis of pharmaceuticals, resins, dyestuffs, rubber accelerators, and pesticides.It is also used in the production of antituberculosis agent, isoniazidwaterproofing agents fo fabricsas a laboratory reagent, catalyst, and curing agent. HUMAN EXPOSURE AND TOXICITY: Symptoms include occasional diarrhea, weight loss, anemia, and ocular and facial paralysis. 4-Methylpyridine induced a dose-related increased frequency of sister chromatid exchange in human lymphocyte cultures from three individuals. Chromosomal aberrations induced by 4-methylpyridine included: chromatid breakscentromeric, intermediate and terminal chromosome breaksterminal and interstitial deletionstranslocationdicentric chromosomesand isochromosomes. ANIMAL STUDIES: 4-Methylpyridine was severely irritating in rabbit skin tests. It is a potent inhibitor of red cell cholinesterase and an effective miotic inhibitor in mice and rabbits. Adrenal cortisol production also is inhibited by 4-methylpyridine treatment. In neurophysilogical tests in rats 3-methylpyridine and 2-methylpyridine affected electrophysiological parameters more than did 4-methylpyridine. 4-Methylpyridine was not mutagenic in Chinese hamster lung cells, and it was not mutagenic when tested with Salmonella typhimurium strains TA97, TA98, TA100 and TA102.
Animal Concentrations4-Methylpyridine is found in horse urine(1).
Signs and SymptomsBurning sensation. Cough. Dizziness. Drowsiness. Headache. Nausea. Sore throat. Unconsciousness. Weakness.MAY BE ABSORBED! Dry skin. Redness. Burning sensation. Pain. Blisters. Further see Inhalation.Redness. Pain. Severe deep burns.Abdominal pain. Burning sensation. Diarrhoea. Vomiting. Further see Inhalation.
Ongoing Test StatusThe following link will take the user to the National Toxicology Program (NTP) Test Agent Search Results page, which tabulates all of the "Standard Toxicology & Carcinogenesis Studies", "Developmental Studies", and "Genetic Toxicity Studies" performed with this chemical. Clicking on the "Testing Status" link will take the user to the status (i.e., in review, in progress, in preparation, on test, completed, etc.) and results of all the studies that the NTP has done on this chemical.[Available from, as of October 22, 2014: http://ntp-apps.niehs.nih.gov/ntp_tox/index.cfm?fuseaction=ntpsearch.searchresults&searchterm=108-89-4]
Effluent Concentrations4-Methylpyridine was detected in 1 of 6 wastewater effluents from energy related processes(1). The process water at a coal gasification facility in Gillette, WY contained 4-methylpyridine in trace quantities(1). Wastewater from coal gasification at the Grand Fork's Energy Technology Center, ND was also reported to contain 4-methylpyridine(2). In addition, wastewater effluent from a shale oil facility in Queensland, Australia was shown to contain 4-methylpyridine(3). Oil shale condensate retort water contained 4-methylpyridine at 6.3 mg/L(4).
Soil Adsorption/MobilityUsing a structure estimation method based on molecular connectivity indices(1), the Koc of 4-methylpyridine can be estimated to be 115(SRC). According to a classification scheme(2), this estimated Koc value suggests that 3-methylpyridine is expected to have high mobility in soil. The pKa of 4-methylpyridine is 5.98(3), indicating that this compound will exist partially in cation form in the environment and cations generally adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Soil studies with 2-methylpyridine(5), a compound expected to have similar sorption properties as 4-methylpryidine(SRC), demonstrated that Koc can vary with pH with lowest adsorption occurring in the non-ionized form(5). Spectral studies of 4-methylpyridine adsorbed to hydrated and dehydrated silica indicate that hydrogen bonding occurs with silica surface silanols via the nitrogen atom on the pyridine ring and that this interaction is stronger than that between this compound and water(6).
수질 위해 등급(WGK)1
TSCA 등재 상태TSCA listed
RTECS 번호UT5425000
운송 번호(UN)UN 2313 (PICOLINES)
독성LD50 orally in rats: 1.29 g/kg (Smyth)
관세 코드29333955
위험 문구(R)10-20/22-24-36/37/38
위험 표시T
안전 문구(S)26-36-45
포장분류III
위험 등급3Acute Tox. 3 DermalAcute Tox. 4 InhalationAcute Tox. 4 OralEye Irrit. 2Flam. Liq. 3Skin Irrit. 2STOT SE 3
기존화학 물질KE-25316
자연 발화 온도1000 °F
저장 분류3 - Flammable liquids
유해 물질 데이터108-89-4(Hazardous Substances Data)

용도

출처

4-Methylpyridine is released by energy-related processes. It is present in coal gassification wastewater (Pellizzari et al 1979), the environment of coke ovens (Naizer and Mashek 1974) and in waters from shale oil waste production (Dobson et al 1985; Hawthorne et al 1985; Leenheer et al 1982). It is also present in coal tar (HSDB, 1988), cigarette smoke (Brunneman et al 1978; IARC 1976) and pyroligneous liquids from woods (Yasuhara and Sugiwara 1987). Methods for the biological treatment of wastewaters containing 4-methylpyridine have been developed (Roubickova 1986) and its movement through (Leenheer and Stuber 1981) and degradation (Sims and Somners 1985) in soils examined.

용도

4-Methylpyridine is used to manufacture isonicotinic acid and derivatives, in waterproofing agents for fabric, and as a solvent for resins, pharmaceuticals, dyestuffs, rubber accelerators, and pesticides. It is also used as a catalyst and curing agent.

일반 설명

4-methyl pyridine is a colorless moderately volatile liquid. (NTP, 1992)

제조 및 합성 방법

생산 방법

Currently, 4-methylpyridine is produced by vapor-phase condensation of acetaldehyde and ammonia (3:1) with subsequent isolation of 4-methylpyridine from the reaction mixture. Reactants are exposed to dehydration-dehydrogenation catalysis such as lead oxide, copper oxide on alumina, thorium oxide, zinc oxide or cadmium oxide on silica-alumina, or cadmium fluoride on silica-magnesia at 400-500°C. This results in a 60% yield of 4-methylpyridine which is isolated by fractional distillation (USEPA 1982). Another production method involves the isolation from by-products of coking operations. The crude pyridine extracts come from noncondensable and condensable coke-oven gasses that have been dehydrated and separated by fractional distillation, but only 45% of 4-methylpyridine is obtained (USEPA 1982). 4-Methylpyridine also can be isolated from a dry distillation of bones or coal (Hawley 1977).