카프릴로일살리실릭애씨드

Danger

H317 (97.6%): May cause an allergic skin reaction [Warning Sensitization, Skin]；H318 (97.6%): Causes serious eye damage [Danger Serious eye damage/eye irritation]

P261, P264+P265, P272, P280, P302+P352, P305+P354+P338, P317, P321, P333+P317, P362+P364, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 41 reports by companies from 4 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.；Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website.

Chemical: Benzoic acid, 2-hydroxy-5-(1-oxooctyl)-；Specific Information Requirement: Obligations to provide information apply. These obligations are:；1. A person introducing this chemical must tell us in writing within 28 calendar days if any of the following circumstances have occurred in relation to their introduction (importation or manufacture):；a. the introduction volume of the chemical exceeds 1 tonne per annum；b. the concentration of the chemical exceeds or is intended to exceed 0.5% in cosmetic products；c. information of the potential of the chemical to cause increased sun sensitivity becomes available；2. A person who introduces this chemical must tell us in writing within 28 calendar days if they become aware of any of the following circumstances, namely, that since the assessment under the Industrial Chemicals (Notification and Assessment) Act 1989:；a. the function or use of the chemical has changed, or is likely to change, significantly;；b. the amount of the chemical being introduced has increased, or is likely to increase, significantly;；c. in the case of a chemical not manufactured, or proposed to be manufactured, in Australia at the time of the assessment—it has begun to be manufactured in Australia;；d. the method of manufacture of the chemical in Australia has changed, or is likely to change, in a way that may result in an increased risk of an adverse effect of the chemical on occupational health and safety, public health or the environment;；e. additional information has become available to the person as to an adverse effect of the chemical on occupational health and safety, public health or the environment.