홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

4-Fluorophenyl isocyanate → N-(4-(7-(benzyloxy)-6-cyano-4-quinolyl)oxyphenyl)-N'-(4-fluorophenyl)urea

HRID 1010106
노트
인쇄 미리보기

반응식

HRID 1010106 반응식
[NH2:1][C:2]1[CH:28]=[CH:27][C:5]([O:6][C:7]2[C:16]3[C:11](=[CH:12][C:13]([O:19][CH2:20][C:21]4[CH:26]=[CH:25][CH:24]=[CH:23][CH:22]=4)=[C:14]([C:17]#[N:18])[CH:15]=3)[N:10]=[CH:9][CH:8]=2)=[CH:4][CH:3]=1.[F:29][C:30]1[CH:35]=[CH:34][C:33]([N:36]=[C:37]=[O:38])=[CH:32][CH:31]=1>C1(C)C=CC=CC=1.C(#N)C>[CH2:20]([O:19][C:13]1[CH:12]=[C:11]2[C:16]([C:7]([O:6][C:5]3[CH:4]=[CH:3][C:2]([NH:1][C:37]([NH:36][C:33]4[CH:34]=[CH:35][C:30]([F:29])=[CH:31][CH:32]=4)=[O:38])=[CH:28][CH:27]=3)=[CH:8][CH:9]=[N:10]2)=[CH:15][C:14]=1[C:17]#[N:18])[C:21]1[CH:26]=[CH:25][CH:24]=[CH:23][CH:22]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 2

HCID 709554-Fluorophenyl isocyanateHCID 229368314-(4-Aminophenoxy)-7-(benzyloxy)-6-cyanoquinoline

생성물 1

HCID 22936525N-(4-(7-(benzyloxy)-6-cyano-4-quinolyl)oxyphenyl)-N'-(4-fluorophenyl)urea수율 91.9%

시약·촉매·용매 2

HCID 1140Toluene용매HCID 6342Acetonitrile용매

반응 조건

온도
120 °C

실험 절차

4-(4-Aminophenoxy)-7-(benzyloxy)-6-cyanoquinoline (7.776 g, 21.2 mmol) was dissolved in a toluene (400 ml) and acetonitrile (200 ml) mixed solvent, and then 4-fluorophenyl isocyanate (3.68 ml, 31.7 mmol) was added and the mixture was heated to reflux at 120° C. for 1 hour. The reaction solution was concentrated under reduced pressure, the residue was suspended in tetrahydrofuran (150 ml), and then hexane (150 ml) was added, sonication was performed, and the precipitated crystals were filtered out and dried under reduced pressure to obtain N-(4-(7-(benzyloxy)-6-cyano-4-quinolyl)oxyphenyl)-N′-(4-fluorophenyl)urea (9.81 g, 19.4 mmol, 91.9%) as light brown crystals. These were dissolved in trifluoroacetic acid (100 ml) and thioanisole (9.13 ml, 77.7 mmol) under a nitrogen atmosphere, and the solution was stirred at 60° C. for 12 hours. The reaction solution was concentrated under reduced pressure, and after adding tetrahydrofuran (50 ml) and then 1N aqueous sodium hydroxide (150 ml) and water (150 ml) to the residue, the mixture was stirred and the precipitated crystals were filtered out and washed with water, diethyl ether and ethyl acetate and dried at 70° C. to obtain the title compound (3.646 g, 8.36 mmol, 43.0%) as yellow crystals. negative ESI-MS 413 (M−Na)−

후처리

  1. additionmixed solvent
  2. temperaturethe mixture was heated
  3. concentrationThe reaction solution was concentrated under reduced pressure
  4. additionhexane (150 ml) was added
  5. customsonication
  6. filtrationthe precipitated crystals were filtered out
  7. customdried under reduced pressure

출처 및 근거

ORD 기록
ord-e0f87acb5250424b9378d1a47b24c118
출처 데이터셋
uspto-grants-2011_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07973160B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트