홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

1-[Bis(4-chlorophenyl)methyl]azetidin-3-one → HCID 178527395, 화합물

HRID 1017239
인쇄

반응식

HRID 1017239 반응식
CC(C)([O-])C.[K+].[CH3:7][S:8]([CH2:11][C:12]1[CH2:13][CH2:14][N:15]([C:18](=[S:20])[OH:19])[CH2:16][CH:17]=1)(=[O:10])=[O:9].[Cl:21][C:22]1[CH:27]=[CH:26][C:25]([CH:28]([C:34]2[CH:39]=[CH:38][C:37]([Cl:40])=[CH:36][CH:35]=2)[N:29]2[CH2:32][C:31](=[O:33])[CH2:30]2)=[CH:24][CH:23]=1>O1CCCC1.O>[Cl:21][C:22]1[CH:27]=[CH:26][C:25]([CH:28]([C:34]2[CH:39]=[CH:38][C:37]([Cl:40])=[CH:36][CH:35]=2)[N:29]2[CH2:30][C:31]([CH2:7][S:8]([CH2:11][C:12]3[CH2:17][CH2:16][N:15]([C:18](=[S:20])[OH:19])[CH2:14][CH:13]=3)(=[O:9])=[O:10])([OH:33])[CH2:32]2)=[CH:24][CH:23]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 225066481-[Bis(4-chlorophenyl)methyl]azetidin-3-one2회HCID 23665647Potassium tert-butoxideHCID 178504868HCID 178504868, 화합물

생성물 1

HCID 178527395HCID 178527395, 화합물

시약·촉매·용매 2

HCID 962Water용매HCID 8028Tetrahydrofuran
용매

반응 조건

온도
-78 °C

실험 절차

The phenolic ester of 4-({1-[bis(4-chlorophenyl)methyl]-3-hydroxyazetidin-3-yl}methylsulfonylmethyl)-3,6-dihydro-2H-pyridine-1-carbothioic acid is prepared in the following manner: 0.52 g of potassium tert-butoxide is added to a mixture of 0.72 g of the phenolic ester of 4-methylsulfonylmethyl-3,6-dihydro-2H-pyridine-1-carbothioic acid and 0.708 g of 1-[bis(4-chlorophenyl)methyl]azetidin-3-one in 15 cm3 of dry tetrahydrofuran cooled under an inert atmosphere to −78° C. The reaction mixture is stirred at −78° C. for 4 hours and then 0.354 g of 1-[bis(4-chlorophenyl)-methyl]azetidin-3-one are added. After two hours at −78° C., the temperature is allowed to return to 20° C. The reaction mixture is diluted in 100 cm3 of water and then the tetrahydrofuran is evaporated off under 2.7 kPa at 40° C. The aqueous phase is extracted with twice 100 cm3 of ethyl acetate. The organic extracts are combined and dried over magnesium sulfate, concentrated under 2.7 kPa at 40° C. The residue obtained is chromatographed on silica (200 g of silica, Amicon, 20-45 μm, porosity 60Angstroem, column 5 cm in diameter), eluting with a cyclohexane:ethyl acetate (6:4 by volume) mixture. The fractions with an Rf={fraction (11/64)} (cyclohexane:ethyl acetate 6:4, silica plate, Merck reference 1.05719, Merck KGaA, 64721 Darmstatd, Germany) are combined and concentrated under 2.7 kPa at 40° C. to give 240 mg of the phenolic ester of 4-({1-[bis(4-chlorophenyl)methyl]-3-hydroxyazetidin-3-yl}methylsulfonylmethyl)-3,6-dihydro-2H-pyridine-1-carbothioic acid.

후처리

  1. waitAfter two hours at −78° C.
  2. customto return to 20° C
  3. customthe tetrahydrofuran is evaporated off under 2.7 kPa at 40° C
  4. extractionThe aqueous phase is extracted with twice 100 cm3 of ethyl acetate
  5. dry with materialdried over magnesium sulfate
  6. concentrationconcentrated under 2.7 kPa at 40° C
  7. customThe residue obtained
  8. customis chromatographed on silica (200 g of silica, Amicon, 20-45 μm, porosity 60Angstroem, column 5 cm in diameter)
  9. washeluting with a cyclohexane:ethyl acetate (6:4 by volume) mixture
  10. concentrationconcentrated under 2.7 kPa at 40° C.

출처 및 근거

ORD 기록
ord-9b7ba6b798664cdfa5146733790e566c
출처 데이터셋
uspto-grants-2002_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06479479B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트