홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ethanol → Ethyl 5-bromo-3-methylpicolinate

HRID 1050428
인쇄

반응식

HRID 1050428 반응식
[Br:1][C:2]1[CH:3]=[C:4]([CH3:11])[C:5]([C:8]([OH:10])=[O:9])=[N:6][CH:7]=1.S(=O)(=O)(O)O.[CH2:17](O)[CH3:18]>>[Br:1][C:2]1[CH:3]=[C:4]([CH3:11])[C:5]([C:8]([O:10][CH2:17][CH3:18])=[O:9])=[N:6][CH:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 3

HCID 702EthanolHCID 1118Sulfuric Acid2회HCID 457897795-Bromo-3-methylpyridine-2-carboxylic acid

생성물 1

HCID 53418426Ethyl 5-bromo-3-methylpicolinate

반응 조건

온도
95 °C

실험 절차

To a stirring solution of 5-bromo-3-methylpicolinic acid (10000 g, 1 equiv, 46.29 moles) in ethanol (50 L) at 0° C. was added sulfuric acid (2.52 L, 1 equiv, 46.29 moles) over 1 h. Following addition of sulfuric acid, the mixture was heated at 95° C. for 20 h. Reaction progress was monitored by using TLC and LCMS. After 20 hours, LCMS showed 12.61% unreacted SM, at RT-0.67 ((M−1)−215.92) and 86.95% product at RT-2.04 ((M+1)−244.2). The reaction mass heated for additional 6 h and LCMS analysis following the additional heating showed 10.07% unreacted SM, at RT-0.7 and 89.93% product at RT-2.08 ((M+1)−244.2. The reaction was stopped by concentrating the reaction mixture under reduced pressure to remove as much solvent as possible. To the residue was added dichloromethane (DCM), (25 L) and the reaction mixture was poured into ice cold water (20 L). The organic (DCM) layer was separated from the aqueous layer and the latter was further extracted twice with DCM (10 L). The combined organic layers were washed with saturated sodium bicarbonate solution (30 L), dried over sodium sulfate, and concentrated under reduced pressure to obtain a brown oil. This brown oil was used in the next step without further purification. Yield: 10.1 Kg, (89.4%); MS (ESI) m/z 244.2 [M+1]+; LCMS purity: 99.11%; 1H NMR (400 MHz, DMSO-d6) δ: 8.61 (s, 1H), 8.13 (s, 1H), 4.29 (q, 2H), 2.44 (s, 1H), 1.28 (t, 3H).

후처리

  1. customReaction progress
  2. customat RT
  3. customat RT
  4. temperatureThe reaction mass heated for additional 6 h
  5. temperatureadditional heating
  6. customat RT
  7. customat RT
  8. concentrationby concentrating the reaction mixture under reduced pressure
  9. customto remove as much solvent as possible
  10. additionTo the residue was added dichloromethane (DCM), (25 L)
  11. additionthe reaction mixture was poured into ice cold water (20 L)
  12. customThe organic (DCM) layer was separated from the aqueous layer
  13. extractionthe latter was further extracted twice with DCM (10 L)
  14. washThe combined organic layers were washed with saturated sodium bicarbonate solution (30 L)
  15. dry with materialdried over sodium sulfate
  16. concentrationconcentrated under reduced pressure
  17. customto obtain a brown oil
  18. customThis brown oil was used in the next step without further purification

출처 및 근거

ORD 기록
ord-5145b8e38bf742a9bfbb5c7f55b15d4c
출처 데이터셋
uspto-grants-2016_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09382248B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트