홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Diethyl Ether → 4-(Ethynyloxy)-1,1'-biphenyl

HRID 1053502
인쇄

반응식

HRID 1053502 반응식
Cl[C:2]([O:5][C:6]1[CH:11]=[CH:10][C:9]([C:12]2[CH:17]=[CH:16][CH:15]=[CH:14][CH:13]=2)=[CH:8][CH:7]=1)=[CH:3]Cl.C(OCC)C.CN(CCN(C)C)C.C([Li])CCC>CCCCC.C(O)C>[C:2]([O:5][C:6]1[CH:11]=[CH:10][C:9]([C:12]2[CH:17]=[CH:16][CH:15]=[CH:14][CH:13]=2)=[CH:8][CH:7]=1)#[CH:3]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 3283Diethyl EtherHCID 8037N,N,N',N'-TetramethylethylenediamineHCID 1237474984-((1,2-Dichlorovinyl)oxy)-1,1'-biphenylHCID 178418339Butyllithium

생성물 1

HCID 698274994-(Ethynyloxy)-1,1'-biphenyl수율 70%

시약·촉매·용매 2

HCID 702Ethanol
용매
HCID 8003Pentane용매2회

반응 조건

온도
-78 °C

실험 절차

To a two-necked, round-bottomed flask (100 mL) equipped with a nitrogen inlet adapter and rubber septum was added the vinyl ether 2 (2.0 g, 7.6 mmol, 1 eq), anhydrous diethyl ether (30 mL), and TMEDA (23 mmol, 3.3 mL, 3 eq), and then cooled at −78° C. 2.5 M n-Butyllithium (9.0 mL, 23 mmol, 3 eq) was then added drop-wise to the reaction mixture for over 5 min. The reaction mixture was then maintained at −78 C for 1 h and at −40° C. for 40 min, and then cooled to −78° C. while 10% ethanol in pentane (10 mL) was added drop-wise. After 10 min, the reaction mixture was then diluted with n-pentane (20 mL) and the washed with saturated solution of ammonium chloride (25 mL). The organic phase was later washed twice with water (20 mL) and then finally with brine (20 mL), dried over anhydrous sodium sulfate, filtered and concentrated to give brown oil. The oil was purified by column chromatography with hexane as the eluent to yield 3 as dark brown oil (0.84 g, 70%) that later crystallized out as brown amorphous solid: mp 48-49° C. The compound was placed in a round bottom flask and was flushed with nitrogen and kept at −78° C. to avoid the decomposition if it was not to be used immediately. 1H NMR (300 MHz, CDCl3): 7.64-7.52 (m, 4H, HAr), 7.48-7.41 (m, 2H, HAr), 7.40-7.34 (m, 3H, HAr), 2.13 (s, 1H, ≡—H) ppm; 13C NMR (75 MHz, CDCl3): 155.0, 140.1, 138.0, 128.9, 128.4, 127.4, 127.0, 115.4, 84.5, 33.5 ppm; IR (cm−1): 3317 (≡C—H), 3029, 2927, 2174 (C≡C), 1606, 1512, 1484, 1208, 1166, 1062, 1008, 941, 838, 641, 548, 450; HRMS (ESI) Calculated for C14H10 [M−H]− 193.0654. Found 193.0651; Elemental analysis Calculated. for C14H10O.0.13H2O: C, 85.54; H, 5.26. found: C, 85.54; H, 5.38.

후처리

  1. customTo a two-necked, round-bottomed flask (100 mL) equipped with a nitrogen inlet adapter
  2. temperatureThe reaction mixture was then maintained at −78 C for 1 h and at −40° C. for 40 min
  3. additionwas added drop-wise
  4. washthe washed with saturated solution of ammonium chloride (25 mL)
  5. washThe organic phase was later washed twice with water (20 mL)
  6. dry with materialfinally with brine (20 mL), dried over anhydrous sodium sulfate
  7. filtrationfiltered
  8. concentrationconcentrated
  9. customto give brown oil
  10. customThe oil was purified by column chromatography with hexane as the eluent

출처 및 근거

ORD 기록
ord-f0eccc755fae44e683d4c8d9497cb7b6
출처 데이터셋
uspto-grants-2016_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09393306B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트