홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

N-Hydroxysuccinimide → 1-[[3-Chloro-4-(methoxycarbonyl)benzoyl]oxy]-2,5-pyrrolidinedione

HRID 1058377
인쇄

반응식

HRID 1058377 반응식
[Cl:1][C:2]1[CH:3]=[C:4]([CH:8]=[CH:9][C:10]=1[C:11]([O:13][CH3:14])=[O:12])[C:5]([OH:7])=[O:6].O[N:16]1[C:20](=[O:21])[CH2:19][CH2:18][C:17]1=[O:22]>O1CCCC1>[CH3:14][O:13][C:11](=[O:12])[C:10]1[CH:9]=[CH:8][C:4]([C:5]([O:7][N:16]2[C:20](=[O:21])[CH2:19][CH2:18][C:17]2=[O:22])=[O:6])=[CH:3][C:2]=1[Cl:1]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 80170N-HydroxysuccinimideHCID 143722353-Chloro-4-(methoxycarbonyl)benzoic acid

생성물 1

HCID 235607681-[[3-Chloro-4-(methoxycarbonyl)benzoyl]oxy]-2,5-pyrrolidinedione수율 112.3%

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매

반응 조건

온도
10 °C

실험 절차

A 3-neck 1 L round-bottom flask equipped with a magnetic stirrer, ice cooling bath, thermometer and an argon inlet tube was set up and charged with 3-chloro-4-(methoxycarbonyl)benzoic acid (Example 72; 21.5 g, 0.1 mol) in tetrahydrofuran (250 mL). The solution was cooled to 10° C. under argon and was treated in succession with N-hydroxysuccinimide (12.66 g, 0.11 mol) and N,N-dicyclohexylcarbodiimide (21.66 g, 0.105 mol). These reagents were washed into the reaction flask with additional tetrahydrofuran (100 mL). A precipitate started to form immediately. The cooling bath was removed and the reaction mixture was stirred at ambient temperature overnight, then was diluted with diethyl ether (400 mL) and stirred for another 30 min. The precipitate was collected by filtration and the filter cake was washed with diethyl ether (3×50 mL). The dried solids (N,N-dicyclohexylurea) weighed 22.2 g (>99% of theory). The combined filtrates were diluted with hexane (100 mL) then were transferred to a 2 L separatory funnel and were washed in turn with cold saturated sodium bicarbonate solution (150 mL) and brine (150 mL). Each aqueous layer was back-extracted in turn with diethyl ether (200 mL), then the combined organic extracts were dried (MgSO4) and evaporated to give crude 2-chloro-4-[[(2,5-dioxo-1-pyrrolidinyl)oxy]carbonyl]benzoic acid methyl ester (˜35 g) as a colorless solid. This material was used directly in the next step without purification.

후처리

  1. customA 3-neck 1 L round-bottom flask equipped with a magnetic stirrer, ice cooling bath
  2. customthermometer and an argon inlet tube was set up
  3. washThese reagents were washed into the reaction flask with additional tetrahydrofuran (100 mL)
  4. customto form immediately
  5. customThe cooling bath was removed
  6. additionwas diluted with diethyl ether (400 mL)
  7. stirringstirred for another 30 min
  8. filtrationThe precipitate was collected by filtration
  9. washthe filter cake was washed with diethyl ether (3×50 mL)
  10. additionThe combined filtrates were diluted with hexane (100 mL)
  11. customthen were transferred to a 2 L separatory funnel
  12. washwere washed in turn with cold saturated sodium bicarbonate solution (150 mL) and brine (150 mL)
  13. extractionEach aqueous layer was back-extracted in turn with diethyl ether (200 mL)
  14. dry with materialthe combined organic extracts were dried (MgSO4)
  15. customevaporated

출처 및 근거

ORD 기록
ord-0a797b8750f64c3ea380a1a70f135382
출처 데이터셋
uspto-grants-2003_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06515124B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트