홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

(Diethylamino)sulfur trifluoride → 5-Fluoro-4-iodoindolin-2-one

HRID 1069659
인쇄

반응식

HRID 1069659 반응식
O[N:2]1[C:10]2[C:5](=[C:6]([I:11])[CH:7]=[CH:8][CH:9]=2)[CH2:4][C:3]1=[O:12].C(N(S(F)(F)[F:19])CC)C>ClCCl>[F:19][C:7]1[C:6]([I:11])=[C:5]2[C:10](=[CH:9][CH:8]=1)[NH:2][C:3](=[O:12])[CH2:4]2
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 123472(Diethylamino)sulfur trifluorideHCID 147409771-Hydroxy-4-iodo-1,3-dihydro-indol-2-one

생성물 1

HCID 97956015-Fluoro-4-iodoindolin-2-one

시약·촉매·용매 1

HCID 6344Dichloromethane용매2회

반응 조건

온도
-25 °C

실험 절차

A suspension of 1,3-dihydro-1-hydroxy-4-iodo-2H-indol-2-one, (2.43 g, 9 mmol) (see below) in dry dichloromethane (500 mL) was cooled to −25° C. under an argon atmosphere with magnetic stirring. A solution of (diethylamino)sulfur trifluoride (DAST, 1.35 mL) (Aldrich) in dry dichloromethane (40 mL) was added dropwise at such a rate that the reaction temperature did not rise above −25° C. (about 15 min.). After stirring for an additional 30 min. at −25° C., the reaction was quenched by the addition of saturated aqueous sodium bicarbonate solution (180 mL) and allowed to warm to room temperature. The mixture was then filtered through Celite® (Fisher Scientific) and the layers separated. The aqueous layer was extracted with dichloromethane (2×300 mL). The dichloromethane layers were washed with saturated aqueous sodium chloride solution (200 mL), combined, dried (magnesium sulfate) and concentrated. Residue was purified by flash chromatography on silics gel using ethyl acetate-dichloromethane (1:7, V/V) as solvent to give 1,3-dihydro-5-fluoro-4-iodo-2H-indol-2-one. (Yield 1.08 g, 43%).

후처리

  1. customdid not rise above −25° C.
  2. custom(about 15 min.)
  3. customthe reaction was quenched by the addition of saturated aqueous sodium bicarbonate solution (180 mL)
  4. temperatureto warm to room temperature
  5. filtrationThe mixture was then filtered through Celite® (Fisher Scientific)
  6. customthe layers separated
  7. extractionThe aqueous layer was extracted with dichloromethane (2×300 mL)
  8. washThe dichloromethane layers were washed with saturated aqueous sodium chloride solution (200 mL)
  9. dry with materialdried (magnesium sulfate)
  10. concentrationconcentrated
  11. customResidue was purified by flash chromatography on silics gel

출처 및 근거

ORD 기록
ord-4139d4d3b85a435798e290cdcb98e521
출처 데이터셋
uspto-grants-2001_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06252086B1

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트