홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Dimethylformamide → 2-(1,3-Dioxolan-2-yl)-3-furaldehyde

HRID 1072981
인쇄

반응식

HRID 1072981 반응식
Br[C:2]1[CH:6]=[CH:5][O:4][C:3]=1[CH:7]1[O:11][CH2:10][CH2:9][O:8]1.C([Li])(C)(C)C.CN([CH:20]=[O:21])C.O.O.C(O)(=O)C(O)=O>CCOCC.O>[O:8]1[CH2:9][CH2:10][O:11][CH:7]1[C:3]1[O:4][CH:5]=[CH:6][C:2]=1[CH:20]=[O:21]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 6228DimethylformamideHCID 61373Oxalic acid dihydrateHCID 123723092-(3-Bromofuran-2-yl)-1,3-dioxolaneHCID 178418306HCID 178418306, 화합물

생성물 1

HCID 220476222-(1,3-Dioxolan-2-yl)-3-furaldehyde수율 68%

시약·촉매·용매 2

HCID 962Water
용매
HCID 3283Diethyl Ether용매2회

반응 조건

온도
-78 °C

실험 절차

2-(3-Bromo-2-furyl)-1,3-dioxolane (438 mg, 2.0 mmol) is dissolved in Et2O (5 mL) in a dry flask under nitrogen, cooled to −78° C., treated dropwise with tert-butyllithium (2.59 mL, 4.4 mmol) and stirred for 1 h. DMF (178 μL, 2.3 mmol) in Et2O (2 mL) is added dropwise, the mixture stirred for 4 h at −78° C., then treated with oxalic acid dihydrate (504 mg, 4.0 mmol) followed by water (2 mL). The cooling bath is removed and the mixture allowed to warm to RT over 1 h. The mixture is diluted with water (20 mL) and EtOAc (20 mL), the layers are separated and the aqueous layer extracted with EtOAc (1×20 mL). The organics are dried over Na2SO4 and concentrated to a yellow oil. The crude material is chromatographed over 12 g slurry-packed silica gel, eluting with 15% EtOAc/hexane. The appropriate fractions are combined and concentrated in vacuo to afford 228 mg (68%) of 2-(1,3-dioxolan-2-yl)-3-furaldehyde as a pale yellow oil. MS (EI) m/z: 168 (M+). 2-(1,3-Dioxolan-2-yl)-3-furaldehyde (2.91 g, 17.31 mmol) is combined with formic acid (17 mL, 451 mmol) and water (4.25 mL) and stirred at RT for 18 h. The mixture is slowly transferred into a solution of NaHCO3 (45 g, 541 mmol) in water (600 mL), then stirred for 0.5 h. EtOAc (200 mL) is added, the layers separated and the aqueous layer extracted with EtOAc (2×200 mL). The combined organics are dried over Na2SO4 and concentrated to a yellow oil (3.28 g). The crude material is chromatographed over 90 g slurry-packed silica gel, eluting with 20% EtOAc/hexane. The appropriate fractions are combined and concentrated to afford 2.45 g of furan-2,3-dicarbaldehyde slightly contaminated with ethylene glycol diformate as a yellow oil. 1H NMR (CDCl3): δ 7.00 (d, J=2 Hz, 1H), 7.67 (d, J=2 Hz, 1H), 10.07 (s, 1 H), 10.49 (s, 1 H) ppm.

후처리

  1. stirringthe mixture stirred for 4 h at −78° C.
  2. customThe cooling bath is removed
  3. temperatureto warm to RT over 1 h
  4. additionThe mixture is diluted with water (20 mL) and EtOAc (20 mL)
  5. customthe layers are separated
  6. extractionthe aqueous layer extracted with EtOAc (1×20 mL)
  7. dry with materialThe organics are dried over Na2SO4
  8. concentrationconcentrated to a yellow oil
  9. customThe crude material is chromatographed over 12 g slurry-packed silica gel
  10. washeluting with 15% EtOAc/hexane
  11. concentrationconcentrated in vacuo

출처 및 근거

ORD 기록
ord-3af91b6c95754932af750e8e2bb79bd9
출처 데이터셋
uspto-grants-2005_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06911543B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트