홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Potassium Carbonate → Diethyl 2-methyl-2-(3-methylbenzyl)-malonate

HRID 1073057
인쇄

반응식

HRID 1073057 반응식
C(=O)([O-])[O-].[K+].[K+].[CH3:7][CH:8]([C:14]([O:16][CH2:17][CH3:18])=[O:15])[C:9]([O:11][CH2:12][CH3:13])=[O:10].[CH3:19][C:20]1[CH:21]=[C:22]([CH:25]=[CH:26][CH:27]=1)[CH2:23]Cl>[I-].[K+].C1OCCOCCOCCOCCOCCOC1.C1(C)C=CC=CC=1>[CH3:7][C:8]([CH2:19][C:20]1[CH:27]=[CH:26][CH:25]=[C:22]([CH3:23])[CH:21]=1)([C:9]([O:11][CH2:12][CH3:13])=[O:10])[C:14]([O:16][CH2:17][CH3:18])=[O:15]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 3

HCID 11430Potassium CarbonateHCID 11857Diethyl methylmalonateHCID 12102m-Xylyl chloride

생성물 1

HCID 22157936Diethyl 2-methyl-2-(3-methylbenzyl)-malonate수율 65.9%

시약·촉매·용매 3

HCID 4875Potassium Iodide촉매HCID 28557
18-Crown-6
촉매
HCID 1140Toluene용매

반응 조건

온도
85 °C

실험 절차

500 ml of toluene, 207 g of ground potassium carbonate, 8 g of potassium iodide, 7 g of 18-crown-6 and 209 g of diethyl methylmalonate were initially introduced into a 2 l four-necked flask. The mixture was heated to 85° C. with stirring. 141 g of 3-methylbenzyl chloride were added dropwise in the course of half an hour and the mixture was then stirred at 90° C. for 8 hours. After cooling, the salts were removed by repeatedly shaking with water and the organic layer was distilled. 184 g of diethyl 2-methyl-2-(3-methylbenzyl)-malonate were obtained at a boiling point of 120° C. and a pressure of about 0.02 mbar. For hydrolysis, the ester was boiled under reflux with stirring for 16 hours with 60 g of NaOH, 170 ml of water and a spatula tip-full of tetradecyltrimethylammonium bromide, ethanol which formed in the meantime being distilled off. The dicarboxylic acid was liberated by acidifying with hydrochloric acid, separated off and heated in xylene for 4 hours under reflux for decarboxylation. The monocarboxylic acid was then esterified with ethanol (p-toluenesulfonic acid as catalyst, cyclohexane as entraining agent for water). 115 g of ethyl 2-(3-methylbenzyl)-propionate (boiling point 70°-73° C. at 0.03 mbar) were obtained. For hydrogenation, 21 g of LiAlH4 were dissolved or suspended in 800 ml of tetrahydrofuran in a 2 l four-necked flask under nitrogen. A mixture of 110 g of ethyl 2-(3-methylbenzyl)-propionate and 100 ml of tetrahydrofuran were then added dropwise with ice cooling. The mixture was then decomposed with ice and hydrochloric acid, extracted with ether and dried over K2CO3, and 75 g of 2-methyl-3-(3-methylphenyl)propan-1-ol (boiling point 68°-70° C. at 0.1 mbar) were obtained by distillation.

후처리

  1. stirringthe mixture was then stirred at 90° C. for 8 hours
  2. temperatureAfter cooling
  3. customthe salts were removed
  4. stirringby repeatedly shaking with water
  5. distillationthe organic layer was distilled

출처 및 근거

ORD 기록
ord-ed38d7e85ca24529a2d2fdc2d84f4e80
출처 데이터셋
uspto-grants-1990_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04968668

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트