홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Methanol → methyl 1H-1,3-benzodiazole-5-carboxylate

HRID 1081353
노트
인쇄 미리보기

반응식

HRID 1081353 반응식
[O-]S([O-])(=O)=O.[Ca+2].[N:7]1[C:11]2[CH:12]=[CH:13][C:14]([C:16]([OH:18])=[O:17])=[CH:15][C:10]=2[NH:9][CH:8]=1.S(=O)(=O)(O)O.[CH3:24]O>>[N:7]1[C:11]2[CH:12]=[CH:13][C:14]([C:16]([O:18][CH3:24])=[O:17])=[CH:15][C:10]=2[NH:9][CH:8]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 4

HCID 887MethanolHCID 1118Sulfuric AcidHCID 24497Calcium SulfateHCID 4594565-Benzimidazolecarboxylic acid

생성물 1

HCID 2779733methyl 1H-1,3-benzodiazole-5-carboxylate수율 89%

실험 절차

A 500 ml round bottom flask equipped with a heating mantle, reflux condenser, and a Drierite® filled drying tube was charged with 16.22 g (0.10 mol) of 5-benzimidazolecarboxylic acid (Aldrich), 400 ml of anhydrous methanol and then (Caution!) 20 ml of concentrated sulfuric acid (Fisher). The reaction mixture was heated to reflux for 18 h and then cooled to ambient temperature. Approximately 75% of the solvents were removed under vacuum and then the remaining liquid residue was slowly poured into 500 ml of saturated sodium bicarbonate solution. The resultant two phase system was then extracted with three 250 ml portions of ethyl acetate. The organic layers were combined and washed with three 250 ml portions of 5% sodium bicarbonate solution followed by one 250 ml portion of brine. The ethyl acetate layer was dried over MgSO4, filtered and the solvents were then removed under reduced pressure to give 15.68 g (0.089 mol, 89% yield) of 5-benzimidazolecarboxylic acid, methyl ester, 10, as a tan solid. 1H NMR (CDCl3, TMS): δ7.3-7.9 (m, 3H), 3.70 (s, 3H).

후처리

  1. customA 500 ml round bottom flask equipped with a heating mantle
  2. temperaturereflux condenser
  3. customdrying tube
  4. temperatureThe reaction mixture was heated
  5. temperatureto reflux for 18 h
  6. customApproximately 75% of the solvents were removed under vacuum
  7. additionthe remaining liquid residue was slowly poured into 500 ml of saturated sodium bicarbonate solution
  8. extractionThe resultant two phase system was then extracted with three 250 ml portions of ethyl acetate
  9. washwashed with three 250 ml portions of 5% sodium bicarbonate solution
  10. dry with materialThe ethyl acetate layer was dried over MgSO4
  11. filtrationfiltered
  12. customthe solvents were then removed under reduced pressure

출처 및 근거

ORD 기록
ord-375151a92ff94ffd9dcc5ce194967a37
출처 데이터셋
uspto-grants-1996_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05585468

반응 노트

불러오는 중…

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트