홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ethanol → 1-[4-Fluoro-2-(methylamino)phenyl]ethanone

HRID 1085916
인쇄

반응식

HRID 1085916 반응식
[F:1][C:2]1[CH:7]=[CH:6][C:5]([C:8](=[O:13])[CH2:9]S(C)=O)=[C:4]([NH:14][CH3:15])[CH:3]=1.C(O)C>C(O)(=O)C.[Zn]>[F:1][C:2]1[CH:7]=[CH:6][C:5]([C:8](=[O:13])[CH3:9])=[C:4]([NH:14][CH3:15])[CH:3]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 2

HCID 702EthanolHCID 10059700Ethanone, 1-[4-fluoro-2-(methylamino)phenyl]-2-(methylsulfinyl)-

생성물 1

HCID 199784601-[4-Fluoro-2-(methylamino)phenyl]ethanone

시약·촉매·용매 2

HCID 23994Zinc촉매HCID 176Acetic Acid용매2회

실험 절차

A solution of 1-(4-fluoro-2-methylaminophenyl)-2-methylsulphinylethanone (161.0 g), prepared in a similar manner to that described in Example 1, in acetic acid (770 ml) was added to a stirred mixture of zinc dust (228.2 g), acetic acid (210 ml) and ethanol (392 ml) at 80° over 1 hour. The mixture was stirred at 80° for a further 2 hours and then allowed to cool to ambient temperature. The combined filtrates obtained after filtration and washing the residue with dichloromethane (400 ml) were concentrated by distillation until the temperature of the remaining mixture reached 132° and then cooled to ambient temperature. Water (1 1) and dichloromethane (330 ml) were added sequentially, the mixture stirred for 10 minutes and the layers then separated. The aqueous phase was extracted with further dichloromethane (2×200ml), the organic extracts combined, then washed with aqueous sodium hydroxide solution (5M; 200 ml) and evaporated in vacuo. Distillation in vacuo (b.p. 74°, 0.4 mm Hg) of the residue gave 4'-fluoro-2'-(methylamino)acetophenone, m.p. 52°-53°.

후처리

  1. customThe combined filtrates obtained
  2. filtrationafter filtration
  3. washwashing the residue with dichloromethane (400 ml)
  4. concentrationwere concentrated by distillation until the temperature of the remaining mixture
  5. customreached 132°
  6. temperaturecooled to ambient temperature
  7. additionWater (1 1) and dichloromethane (330 ml) were added sequentially
  8. stirringthe mixture stirred for 10 minutes
  9. customthe layers then separated
  10. extractionThe aqueous phase was extracted with further dichloromethane (2×200ml)
  11. washwashed with aqueous sodium hydroxide solution (5M; 200 ml)
  12. customevaporated in vacuo
  13. distillationDistillation in vacuo (b.p. 74°, 0.4 mm Hg) of the residue

출처 및 근거

ORD 기록
ord-46d1d858bed74796b531d3ac63c5ba25
출처 데이터셋
uspto-grants-1991_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05011931

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트