홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Nitric Acid → 1-Iodo-2-nitro-4-(trifluoromethyl)benzene

HRID 1089673
인쇄

반응식

HRID 1089673 반응식
S(=O)(=O)(O)O.[N+:6]([O-:9])(O)=[O:7].[F:10][C:11]([F:20])([F:19])[C:12]1[CH:17]=[CH:16][C:15]([I:18])=[CH:14][CH:13]=1>O>[N+:6]([C:14]1[CH:13]=[C:12]([C:11]([F:19])([F:20])[F:10])[CH:17]=[CH:16][C:15]=1[I:18])([O-:9])=[O:7]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 944Nitric AcidHCID 1118Sulfuric AcidHCID 67993Benzene, 1-iodo-4-(trifluoromethyl)-

생성물 1

HCID 145020621-Iodo-2-nitro-4-(trifluoromethyl)benzene수율 86%

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
50 °C

실험 절차

A mixture of 87.6 ml of concentrated sulphuric acid and 46.8 ml of concentrated nitric acid (d=1.52) is prepared at 0° C. This mixture is added dropwise to 272 g of p-trifluoromethyliodobenzene maintained at 50° C., which takes about 1 hour, after which time the application of heat is ceased and stirring is continued for a further 30 minutes. The mixture is then hydrolysed by pouring onto 750 ml of water. The product is subsequently extracted three times with 600 ml of dichloromethane each time, and the organic phase is washed in succession with water and a 20% solution of sodium bicarbonate. The solvent is then evaporated and distillation yields 273 g of 2-nitro-4-trifluoromethyliodobenzene, b.p./8 mm =120°-125° C. (yield 86%).

후처리

  1. customis prepared at 0° C
  2. temperatureafter which time the application of heat
  3. waitis continued for a further 30 minutes
  4. extractionThe product is subsequently extracted three times with 600 ml of dichloromethane each time
  5. washthe organic phase is washed in succession with water
  6. customThe solvent is then evaporated
  7. distillationdistillation

출처 및 근거

ORD 기록
ord-902a181fa60641ed8e81f9d75755488d
출처 데이터셋
uspto-grants-1992_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05079245

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트