홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Acetic Acid → (2S,3S)-1-(cyclopropylamino)-3-(dibenzylamino)-1-oxohexan-2-yl acetate

HRID 1099512
인쇄

반응식

HRID 1099512 반응식
[CH2:1]([N:8]([CH2:15][C:16]1[CH:21]=[CH:20][CH:19]=[CH:18][CH:17]=1)[C@@H:9]([CH2:12][CH2:13][CH3:14])[CH:10]=[O:11])[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1.[CH:22]1([N+:25]#[C-:26])[CH2:24][CH2:23]1.[C:27](O)(=[O:29])[CH3:28].C(=O)(O)[O-:32].[Na+]>ClCCl.CCCCCC>[C:27]([O:11][C@@H:10]([C@@H:9]([N:8]([CH2:1][C:2]1[CH:3]=[CH:4][CH:5]=[CH:6][CH:7]=1)[CH2:15][C:16]1[CH:17]=[CH:18][CH:19]=[CH:20][CH:21]=1)[CH2:12][CH2:13][CH3:14])[C:26]([NH:25][CH:22]1[CH2:24][CH2:23]1)=[O:32])(=[O:29])[CH3:28]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 176Acetic AcidHCID 516892Sodium BicarbonateHCID 2758008IsocyanocyclopropaneHCID 44223341(S)-2-(dibenzylamino)pentanal

생성물 1

HCID 44594157(2S,3S)-1-(cyclopropylamino)-3-(dibenzylamino)-1-oxohexan-2-yl acetate

시약·촉매·용매 2

HCID 6344
Dichloromethane
용매
HCID 8058Hexane용매

반응 조건

온도
27.5 °C

실험 절차

To a cooled (0-5° C.) solution of (S)-2-(dibenzylamino)pentanal in dichloromethane (210 mL) was added cyclopropylisonitrile followed by acetic acid at 0-5° C. The reaction mixture temperature was raised to 25-30° C. over 40-60 minutes, and stirred for 16-18 hours at 25-30° C. Progress of the reaction was monitored by TLC analysis. When the reaction was complete, the mixture was cooled to 0-5° C., and saturated sodium bicarbonate solution (200 mL) was added. The organic layer was separated and the aqueous layer was extracted with dichloromethane twice. The combined organic layers were washed with water (1×200 mL), brine (1×200 mL), dried over anhydrous sodium sulfate, and concentrated under reduced pressure. The crude product thus obtained was slurried in hexane (150 mL) and stirred for one hour at 25-35° C. The slurry was filtered and the solid washed with hexane and dried under reduced pressure to provide 17.0 g of (2S,3S)-1-(cyclopropylamino)-3-(dibenzylamino)-1-oxohexan-2-yl acetate as a white solid.

후처리

  1. temperaturethe mixture was cooled to 0-5° C.
  2. customThe organic layer was separated
  3. extractionthe aqueous layer was extracted with dichloromethane twice
  4. washThe combined organic layers were washed with water (1×200 mL), brine (1×200 mL)
  5. dry with materialdried over anhydrous sodium sulfate
  6. concentrationconcentrated under reduced pressure
  7. customThe crude product thus obtained
  8. stirringstirred for one hour at 25-35° C
  9. filtrationThe slurry was filtered
  10. washthe solid washed with hexane
  11. customdried under reduced pressure

출처 및 근거

ORD 기록
ord-17fb77a7952b41eab4f32262ae1b570a
출처 데이터셋
uspto-grants-2012_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08143448B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트