Methane → Benzene, ethenyl-, polymer with 1,3-butadiene

참여 물질

반응 단계

A toner was prepared by extrusion of the above polymer, 92 percent, 6 percent of REGAL 330® carbon black and 2 percent of CPC (cetyl pyridinium chloride charge additive) followed by micronization to 10 microns. The minimum fix temperature of the toner was 230° F. as determined by no cracking of the fused toner images as a result of a 180 degrees paper crease test (paper folded 180 degrees, visually observed the breadth of cracking at crease) and the minimum fix temperature of the toner was 230° F. when no appreciable, for example a peppered, toned image was removed with SCOTCH® Tape Magic 810, and the hot offset temperature was 320° F. where the toned image sticks to silicone roll fuser as indicated herein. When fused, toner images were observed to offset from paper onto a silicone fuser roll, and then was imprinted onto the same paper or subsequent papers. The hot offset temperature, where the toner failed to release from the fuser roll, was 300° F.

출처 및 근거