돌아가기
Huagongshe화공사 화학 정보 인쇄 보고서 · 연구 참고용
HRID 1110136생성일: 2026년 10월 26일

Hydrochloric Acid → 4-Fluorophenyl-2-(2-Trifluoromethyl-5-Thiazolyl)Ethanone

https://huagongshe.com/reaction/1110136

반응식

참여 물질

역할이름HCID투입량
반응물Hydrochloric AcidHCID 313—
반응물DiisopropylamineHCID 7912—
반응물Hydrofluoric AcidHCID 14917—
반응물TrimethylsilaneHCID 70435—
반응물2-(4-Fluorophenyl)-2-[(trimethylsilyl)oxy]acetonitrileHCID 11715552—
반응물5-(Bromomethyl)-2-(trifluoromethyl)thiazoleHCID 15239219—
반응물ButyllithiumHCID 178418339—
용매AcetoneHCID 180—
용매MethanolHCID 887—
용매TetrahydrofuranHCID 8028—
용매HexaneHCID 8058—
생성물4-Fluorophenyl-2-(2-Trifluoromethyl-5-Thiazolyl)EthanoneHCID 15239224—

반응 조건

온도-70 °C

반응 단계

A solution of 2.4M n-butyl lithium in hexane (6.4 mL, 15.4 mmol) was added to a solution of 2.15 mL (15.4 mmol) of diisopropylamine in 50 mL of dry tetrahydrofuran -10° C. under nitrogen with stirring over a 2-min period. The resulting solution was cooled to -70° C. and a solution containing 3.18 g (14 mmol) of 2-(trimethylsilyloxy)-2-(4'-fluorophenyl)acetonitrile in 3 mL of dry tetrahydrofuran was added dropwise by means of a syringe pump over a 20-min period under nitrogen with stirring. The resulting bright yellow solution was stirred for an additional 30 min at -70° C. or below and then a solution of 2.92 g (11.9 mmol) of 5-bromomethyl-2-trifluoromethylthiazole in 5 mL of dry tetrahydrofuran was added over 30 min under nitrogen with stirring to obtain a dark, thick slurry. After a 45-min reaction period this mixture was allowed to warm and was poured into a rapidly stirred mixture consisting of 25 mL of 10 percent aqueous hydrochloric acid and 10 mL of methanol. A 0.5 mL portion of 48 percent aqueous hydrofluoric acid was then added and the mixture stirred until all of the trimethylsilane protecting group was removed. Sufficient 10 percent aqueous sodium hydroxide was added with stirring to adjust the pH to about 10 and after 15 min the phases were separated. The aqueous phase was extracted with 2×30 mL of ether and the combined organic phases were washed with 50 mL of 10 percent aqueous hydrochloric acid and 50 mL of saturated aqueous sodium chloride, dried over magnesium sulfate, and concentrated by evaporation under reduced pressure. The residue was kugelrohr distilled, first at 70° C. and 0.05 torr (6.7 Pa (Pascals)) to remove 4-fluorobenzaldehyde and then at 100°-110° C. and 0.05 tort (6.7 Pa) to distill 2.93 g (85 percent of theory) of the title compound, which was obtained as a waxy yellow solid of 95 percent purity by gas liquid chromatography. An analytical sample obtained by crystallization from a mixture of hexane and acetone melted at 66.5°-68.5° C.

출처 및 근거

DOI10.6084/m9.figshare.5104873.v1
특허 번호US05324837
출처 데이터셋uspto-grants-1994_06
ORD IDord-1c3ad5c254ad41ee9457e578112ecd1f
출처 메모uspto-grants-1994_06