홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Toluene → 6-(2-Chlorophenyl)-2-methoxy-3-nitropyridin-4-amine

HRID 1191265
인쇄

반응식

HRID 1191265 반응식
Cl[C:2]1[N:7]=[C:6]([O:8][CH3:9])[C:5]([N+:10]([O-:12])=[O:11])=[C:4]([NH2:13])[CH:3]=1.[Cl:14][C:15]1[CH:20]=[CH:19][CH:18]=[CH:17][C:16]=1B(O)O.C(=O)([O-])[O-].[Na+].[Na+].C1(C)C=CC=CC=1>ClCCl.C(OCC)(=O)C.O.C(O)C>[Cl:14][C:15]1[CH:20]=[CH:19][CH:18]=[CH:17][C:16]=1[C:2]1[N:7]=[C:6]([O:8][CH3:9])[C:5]([N+:10]([O-:12])=[O:11])=[C:4]([NH2:13])[CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 4

HCID 1140TolueneHCID 10340Sodium CarbonateHCID 27343222-Chlorophenylboronic acidHCID 866574066-Chloro-2-methoxy-3-nitro-4-pyridinamine

생성물 1

HCID 674116886-(2-Chlorophenyl)-2-methoxy-3-nitropyridin-4-amine

시약·촉매·용매 4

HCID 702Ethanol
용매
HCID 962Water용매2회
HCID 6344Dichloromethane용매
HCID 8857Ethyl Acetate용매

반응 조건

온도
69 °C

실험 절차

A 5 L, four neck round bottom flask equipped with mechanical stirrer, water condenser with nitrogen inlet, thermocouple, and stopper was charged with 6-chloro-2-methoxy-3-nitro-4-pyridinamine (125.30 g, 0.615 mol), 2-chlorophenylboronic acid (116.36 g, 0.744 mol), sodium carbonate (164.97 g, 1.54 mol), toluene (1.80 L), water (0.8 L), and ethanol (0.625 L) and the resulting mixture stirred to achieve a red slurry. The slurry was heated to a mild reflux for 15 min to degas solution and then the temperature was lowered to 60° C. The resulting mixture was treated with (1,1′-bis-(di-tert-butylphosphino)ferrocenepalladium(II) chloride (40.8 g, 61 mmol) and the temperature increased to 69° C., generating a mild reflux. The temperature to 60° C. and stirring was continued for 17 h. The resulting mixture was diluted into water (2 L) and ethyl acetate (1 L), then filtered through CELITE, washing with ethyl acetate (1 L). The layers of filtrate were partitioned and the aqueous further extracted with ethyl acetate (3×500 mL). The combined organics were dried (MgSO4) and concentrated to yield a dark oil. The dark oil was dissolved in dichloromethane and slurried with silica gel (325 g). The slurry was loaded onto a BIOTAGE 150M (2.5 kg silica) and eluted with dichloromethane (3 L) and ethyl acetate-dichloromethane 1:19 (9 L). Fractions of suitable purity were concentrated, lastly from heptane (500 mL) to yield the title compound as a residue. The residue (282 g) was triturated with MTBE (0.50 L), heated in water bath at 40° C. for 30 min, transferred to a mechanically stirred 5 L round bottom flask then diluted with heptane (2 L). The resulting slurry was stirred for 1 h at room temperature and the solids collected by filtration. The filter cake washed with MTBE-heptane (1:9, 500 mL) and heptane (500 mL), then dried in vacuum oven at 50° C. for 45 min to yield 6-(2-chlorophenyl)-2-methoxy-3-nitropyridin-4-amine as a yellow solid. 1H NMR (400 MHz, CHLOROFORM-d) δ 3.62 (s, 1H), 4.07 (s, 3H), 6.14 (br. s., 2H), 6.69 (s, 1H), 7.30-7.40 (m, 2H), 7.42-7.52 (m, 1H), 7.59-7.66 (m, 1H)

후처리

  1. customA 5 L, four neck round bottom flask equipped with mechanical stirrer, water condenser with nitrogen inlet
  2. temperatureThe slurry was heated to
  3. temperaturea mild reflux for 15 min
  4. customto degas solution
  5. customwas lowered to 60° C
  6. stirringThe temperature to 60° C. and stirring
  7. filtrationfiltered through CELITE
  8. washwashing with ethyl acetate (1 L)
  9. customThe layers of filtrate were partitioned
  10. extractionthe aqueous further extracted with ethyl acetate (3×500 mL)
  11. dry with materialThe combined organics were dried (MgSO4)
  12. concentrationconcentrated
  13. customto yield a dark oil
  14. washeluted with dichloromethane (3 L) and ethyl acetate-dichloromethane 1:19 (9 L)
  15. concentrationFractions of suitable purity were concentrated, lastly from heptane (500 mL)

출처 및 근거

ORD 기록
ord-c3523495041f439fa10fb5293811f604
출처 데이터셋
uspto-grants-2014_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08680098B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트