Methane → Benzene, ethenyl-, polymer with 1,3-butadiene

HRID 1197738

반응식

HRID 1197738 반응식
C.[CH3:2][CH2:3][CH2:4][CH2:5]CCCC[CH2:10][CH2:11][CH2:12][CH2:13][CH2:14][CH2:15][CH2:16][CH2:17][N+]1C=CC=CC=1.[Cl-]>>[CH2:2]=[CH:3][CH:4]=[CH2:5].[CH2:17]=[CH:16][C:15]1[CH:10]=[CH:11][CH:12]=[CH:13][CH:14]=1

참가 물질

3

반응물 2

HCID 297MethaneHCID 31239Cetylpyridinium Chloride

생성물 1

HCID 62697Benzene, ethenyl-, polymer with 1,3-butadiene

실험 절차

A toner was prepared by extrusion with the above polymer, 92 percent, 6 percent of Regal 330® carbon black and 2 percent of CPC (cetyl pyridinium chloride charge additive) followed by micronization to 10 microns. The minimum fix temperature of the toner was 210° F. as determined by no cracking of the fused toner images as a result of a 180° paper crease test (paper folded 180 degrees, visually observed the breadth of cracking at crease) and the minimum fix temperature of the toner was 230° F. when no appreciable, for example a peppered, toned image was removed with SCOTCH® Tape Magic 810, and the hot offset temperature was 320° F. where the toned image sticks to silicone roll fuser as indicated herein. When fused, toner images were observed to offset from paper onto a silicone fuser roll, and then was imprinted onto the same paper or subsequent papers.

후처리

  1. customwas 210° F.
  2. customa result of a 180° paper crease test (paper folded 180 degrees
  3. customwas 230° F.
  4. customwas removed with SCOTCH® Tape Magic 810
  5. customwas 320° F.

출처 및 근거

ORD 기록
ord-a261e920e55243638bd074188a300a17
출처 데이터셋
uspto-grants-1994_01
특허 번호
US05278016

연결된 노트

불러오는 중…