홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Ethyl cyanoacetate → 2-(2-Methylpropyl)butanedinitrile

HRID 11993
노트
인쇄 미리보기

반응식

HRID 11993 반응식
[C:1]([CH2:3][C:4](OCC)=O)#[N:2].C(=O)[CH2:10][CH:11]([CH3:13])[CH3:12].CCCCCC.[C-:21]#[N:22].[K+]>O.N1CCCCC1>[CH2:10]([CH:4]([CH2:3][C:1]#[N:2])[C:21]#[N:22])[CH:11]([CH3:13])[CH3:12]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 7764Ethyl cyanoacetateHCID 8058HexaneHCID 9032Potassium Cyanide2회HCID 115523-Methylbutanal

생성물 1

HCID 161161282-(2-Methylpropyl)butanedinitrile수율 99%

시약·촉매·용매 2

HCID 8082Piperidine촉매
HCID 962
Water
용매
2회

실험 절차

A mixture of ethyl cyanoacetate (73.3 g, 6.48 mol), isovaleraldehyde (613.9 g, 7.13 mol), piperidine (5.5 g, 0.065 mol), and hexane (0.5 L) was placed under reflux with continuous removal of water. When no additional water was collected, the mixture was cooled and distilled under vacuum to remove solvent. Isopropanol (1 L) was added to the remaining oil, followed by a solution of potassium cyanide (422 g, 6.48 mol) in water (2 L). The reaction mixture was maintained below 35° C. during addition of the potassium cyanide solution and then held at approximately 35° C. for 4 h. The reaction mixture was distilled at atmospheric pressure until a temperature of 95° C. was reached and then refluxed at this temperature for 5 h. The reaction mixture was cooled, diluted with water (0.5 L) and extracted with 1 L methyl tert-butyl ether (MTBE). The MTBE extract was washed with water (0.5 L), dried over anhydrous magnesium sulfate, filtered, and concentrated under vacuum to give 873.4 g of 2-isobutyl-succinonitrile as an oil. Purified samples of 2-isobutyl-succinonitrile can be obtained by vacuum distillation (90° C. at 0.275 mm Hg).

후처리

  1. customWhen no additional water was collected
  2. temperaturethe mixture was cooled
  3. distillationdistilled under vacuum
  4. customto remove solvent
  5. additionIsopropanol (1 L) was added to the remaining oil
  6. distillationThe reaction mixture was distilled at atmospheric pressure until a temperature of 95° C.
  7. temperaturerefluxed at this temperature for 5 h
  8. temperatureThe reaction mixture was cooled
  9. additiondiluted with water (0.5 L)
  10. extractionextracted with 1 L methyl tert-butyl ether (MTBE)
  11. extractionThe MTBE extract
  12. washwas washed with water (0.5 L)
  13. dry with materialdried over anhydrous magnesium sulfate
  14. filtrationfiltered
  15. concentrationconcentrated under vacuum

출처 및 근거

ORD 기록
ord-c9764fada08d4935a6780c2b27f8914f
출처 데이터셋
uspto-grants-2010_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07727749B2

반응 노트

불러오는 중…

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트