홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Acetyl chloride → 1-[5-(4-Fluoro-phenyl)-3-methyl-3H-[1,2,3]-triazol-4-yl]-ethanone

HRID 1258876
노트
인쇄 미리보기

반응식

HRID 1258876 반응식
[F:1][C:2]1[CH:7]=[CH:6][C:5]([C:8]2[N:9]=[N:10][N:11]([CH3:13])[CH:12]=2)=[CH:4][CH:3]=1.[Li]CCCC.C([Cu])#N.[Li+].[Cl-].[C:24](Cl)(=[O:26])[CH3:25].C(=O)([O-])[O-].[Na+].[Na+]>COCCOC.C1COCC1>[F:1][C:2]1[CH:3]=[CH:4][C:5]([C:8]2[N:9]=[N:10][N:11]([CH3:13])[C:12]=2[C:24](=[O:26])[CH3:25])=[CH:6][CH:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 6

HCID 6367Acetyl chlorideHCID 10340Sodium CarbonateHCID 433294Lithium ChlorideHCID 674955714-(4-Fluoro-phenyl)-1-methyl-1H-[1,2,3]triazoleHCID 178418339ButyllithiumHCID 178418546HCID 178418546, 화합물

생성물 1

HCID 67954812
1-[5-(4-Fluoro-phenyl)-3-methyl-3H-[1,2,3]-triazol-4-yl]-ethanone
수율 50.2%

시약·촉매·용매 2

HCID 8028Tetrahydrofuran용매HCID 80711,2-Dimethoxyethane용매

반응 조건

온도
-35 °C

실험 절차

To a suspension of 4-(4-fluoro-phenyl)-1-methyl-1H-[1,2,3]triazole (3.54 g, 20.0 mmol) in DME (52 mL) was added n-BuLi (1.6 M in hexane, 15.0 mL, 24.0 mmol) dropwise at −75° C. The mixture was allowed to warm up to −35° C. and was stirred at −35° C. for 1 h. The reaction mixture was cooled again to −78° C. and a light green suspension of CuCN (1.79 g, 20.0 mmol) and LiCl (1.70 g, 40.0 mmol) in THF (26 ml) was added rapidly while stirring at −78° C. After 1 h the mixture was allowed to warm up to −35° C. and acetyl chloride (7.10 mL, 100.0 mmol) was added dropwise at this temperature. Then the reaction mixture was stirred at room temperature for 2 h and then poured carefully into aqueous saturated sodium carbonate solution (150 mL) and extracted with ethyl acetate. The combined organic extracts were washed with brine, dried over sodium sulphate, filtered and evaporated. Purification by chromatography (silica, 0 to 100% ethyl acetate in heptane) afforded the title compound (2.2 g, 50%) as a yellow oil. MS: m/e=220.3 [M+H]+.

후처리

  1. temperatureThe reaction mixture was cooled again to −78° C.
  2. additionwas added rapidly
  3. stirringwhile stirring at −78° C
  4. waitAfter 1 h the mixture was allowed
  5. temperatureto warm up to −35° C.
  6. stirringThen the reaction mixture was stirred at room temperature for 2 h
  7. extractionextracted with ethyl acetate
  8. washThe combined organic extracts were washed with brine
  9. dry with materialdried over sodium sulphate
  10. filtrationfiltered
  11. customevaporated
  12. customPurification by chromatography (silica, 0 to 100% ethyl acetate in heptane)

출처 및 근거

ORD 기록
ord-4b4a287fbb7b4f499cdd1cb1e983bff7
출처 데이터셋
uspto-grants-2013_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08466181B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트