Allyl chloride → Allyl chloride

참여 물질

반응 조건

반응 단계

Dimethylchlorosilane as one feed stream and a mixture of 2.7×10−3 mol % of di-μ-chlorobis[(cycloocta-1c,5c-diene)iridium(I)] and 7×10−1 mol % of 1,5-cyclooctadiene in allyl chloride as a second feed stream were fed in a molar ratio of silane:allyl chloride mixture of 1:1.05 at a rate of 2.8 l/h (based on the total volume of the components introduced) via separate metering pumps into a loop reactor maintained at 80° C. under a pressure of 0.4 MPa and having a volume of 1.4 l. After working up the crude mixture by distillation using a thin film evaporator to separate off the catalyst and the excess of allyl chloride, chloro(3-chloropropyl)dimethylsilane was obtained in a yield of 95% and a purity of >99% based on the silane.

출처 및 근거