Dibutyl-zinn [German] → 2,4-Hexadiyn-1,6-diol bisethylurethane

HRID 127345

반응식

HRID 127345 반응식
[CH2:1]([OH:8])[C:2]#[C:3][C:4]#[C:5][CH2:6][OH:7].[CH2:9]([N:11]=[C:12]=[O:13])[CH3:10].C([Sn]CC[CH2:21][CH3:22])CCC.C([CH:25](CCCC)[C:26]([O-])=[O:27])C>[Cu].C(N(CC)CC)C.COCCOC>[CH2:1]([OH:8])[C:2]#[C:3][C:4]#[C:5][CH2:6][OH:7].[CH2:9]([N:11]([CH2:21][CH3:22])[C:12]([O:27][CH2:26][CH3:25])=[O:13])[CH3:10]

참가 물질

8

반응물 4

HCID 6484Dibutyl-zinn [German]HCID 8022Ethyl isocyanateHCID 94973Diacetylene glycolHCID 40723562-Ethylhexanoate

생성물 1

HCID 867342152,4-Hexadiyn-1,6-diol bisethylurethane수율 95%

시약·촉매·용매 3

HCID 23978Copper촉매HCID 80711,2-Dimethoxyethane용매HCID 8471Triethylamine용매

실험 절차

The monomer 2,4-hexadiyn-1,6-diol-bisethylurethane is synthesized in 95% yield by the reaction of 11.0 gm (0.10 mole) 2,4-hexadiyn-1,6-diol with 26.5 gm (0.37 mole) ethylisocyanate in the presence of 1,2-dimethoxyethane (50 ml), dibutyltin bis(2-ethylhexanoate (0.1 gm), and triethylamine (2 ml). The monomer is recrystallized as approximately 3 cm long needles by the slow cooling of a 10:90 acetone/petroleum either solution (75 ml) containing 0.2 sample, as described in Example 4. These crystals rapidly turn pink upon exposure to light. Polymerization proceeded quantitatively by 60Co γ-ray irradiation at a dose rate of 1 Mrad/hr and a total dosage of 60 Mrad. The resulting polymer fibers are copper-like in appearance and strongly dichroic, with dichroic axis in the fiber axis direction. The polymer fibers are monoclinic monocrystals in which the polymer chain axis, with repeat length 4.9 A is in a non-unique axis direction. The polymer fibers are annealed as described in Examples 4 and 5, in order to obtain reversible thermal-dimensional behavior. The annealed polymer fiber has a negative thermal expansion coefficient over the entire temperature range from -50° to 100° C. The average thermal expansion coefficient is -1.46×10-5 ° C.-1 between -50° and +100° C. and -1.31×10-5 ° C.-1 between -50° and +40° C.

후처리

  1. customThe monomer is recrystallized as approximately 3 cm long needles by the
  2. temperatureslow cooling of a 10:90 acetone/petroleum either solution (75 ml)
  3. additioncontaining 0.2 sample
  4. customPolymerization
  5. customproceeded quantitatively by 60Co γ-ray irradiation at a dose rate of 1 Mrad/hr
  6. customto obtain reversible thermal-dimensional behavior
  7. customfrom -50° to 100° C
  8. customis -1.46×10-5 ° C.
  9. custom1 between -50° and +100° C. and -1.31×10-5 ° C.
  10. custom1 between -50° and +40° C.

출처 및 근거

ORD 기록
ord-4896dedd366347e98302b19e858c127c
출처 데이터셋
uspto-grants-1981_03
특허 번호
US04255535

연결된 노트

불러오는 중…