홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Methacrylic Acid → HCID 18431813, 화합물

HRID 1278955
노트
인쇄 미리보기

반응식

HRID 1278955 반응식
O=P12OP3(OP(OP(O3)(O1)=O)(=O)O2)=O.[C:15]1([C:21]2[CH:25]=[CH:24][S:23][C:22]=2[CH3:26])[CH:20]=[CH:19][CH:18]=[CH:17][CH:16]=1.[C:27](O)(=[O:31])[C:28](C)=[CH2:29]>ClCCl>[CH3:26][C:22]1[S:23][C:24]2[CH2:29][CH2:28][C:27](=[O:31])[C:25]=2[C:21]=1[C:15]1[CH:16]=[CH:17][CH:18]=[CH:19][CH:20]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 4093Methacrylic Acid2회HCID 14812Phosphorus oxide (P4O10)2회HCID 27753082-methyl-3-phenylthiophene

생성물 1

HCID 18431813HCID 18431813, 화합물

시약·촉매·용매 1

HCID 6344Dichloromethane용매3회

반응 조건

온도
100 °C

실험 절차

In a 2 l 5 neck round bottled flask equipped with nitrogen inlet, 250 ml pressure equalized addition funnel, reflux condenser, thermometer, and mechanical stir was added 1 Kg polyphosphoric acid (Aldrich, 84%). The temperature was raised to 100° C., then 180 g-phosphorus pentoxide was added and the temperature was raised to 130° C. Stirring was continued until all the phosphorus pentoxide had dissolved then the flask and contents were cooled to 80° C. A solution containing 79.2 g (455 mmol) 3-phenyl-2-methylthiophene and 40.1 g (465 mmol) methacrylic acid (Aldrich) dissolved in 100 ml dichloromethane was added slowly. Stirring continued with refluxing dichloromethane for 7 h, during which time an additional 130.8 g (1.52M) methacrylic acid in 250 ml dichloromethane was added (in portions, every 1.5 h). The contents of the flask were poured on to ice, the organic layer was collected with 20% dichloromethane in hexane, washed with water, neutralized with a saturated solution of sodium bicarbonate, then again washed with water. The organic fraction was dried over magnesium sulfate, filtered, then the solvents were removed in vacuo. Yield: 71.4 g (65%) (89.32 g dark orange oil, 80% by GC: used in subsequent steps without further purification). The title compound was analysed by 1H-NMR spectroscopy.

후처리

  1. customequipped with nitrogen inlet
  2. additionaddition funnel
  3. temperaturereflux condenser
  4. temperaturethe temperature was raised to 130° C
  5. stirringStirring
  6. dissolutionhad dissolved
  7. temperaturethe flask and contents were cooled to 80° C
  8. additionwas added slowly
  9. stirringStirring
  10. customevery 1.5 h
  11. additionThe contents of the flask were poured on to ice
  12. customthe organic layer was collected with 20% dichloromethane in hexane
  13. washwashed with water
  14. washagain washed with water
  15. dry with materialThe organic fraction was dried over magnesium sulfate
  16. filtrationfiltered
  17. customthe solvents were removed in vacuo
  18. customYield: 71.4 g (65%) (89.32 g dark orange oil, 80% by GC: used in subsequent steps without further purification)

출처 및 근거

ORD 기록
ord-8cff45c450ae4706be7d5ad442951836
출처 데이터셋
uspto-grants-2002_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06444833B1

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트