홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ammonia → 3,5-Ditert-butyl-4-hydroxybenzamide

HRID 1279905
인쇄

반응식

HRID 1279905 반응식
[CH3:1][C:2]([C:5]1[CH:6]=[C:7]([CH:11]=[C:12]([C:15]([CH3:18])([CH3:17])[CH3:16])[C:13]=1[OH:14])[C:8](O)=[O:9])([CH3:4])[CH3:3].C(N1C=CN=C1)([N:21]1C=CN=C1)=O.N>O1CCCC1>[CH3:1][C:2]([C:5]1[CH:6]=[C:7]([CH:11]=[C:12]([C:15]([CH3:18])([CH3:17])[CH3:16])[C:13]=1[OH:14])[C:8]([NH2:21])=[O:9])([CH3:4])[CH3:3]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 222AmmoniaHCID 150073,5-Di-tert-butyl-4-hydroxybenzoic acidHCID 682631,1'-Carbonyldiimidazole

생성물 1

HCID 6165023,5-Ditert-butyl-4-hydroxybenzamide수율 104.1%

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매

반응 조건

온도
26 °C

실험 절차

In a 22 L Morton flask, 749 g (3.0 mol) of 3,5-bis(1,1-dimethylethyl)-4-hydroxybenzoic acid, 533 g (3.3 mol) carbonyldiimidazole and tetrahydrofuran (THF) were combined and heated slowly to reflux and allowed to reflux for 2.5 hours. The reaction mixture was cooled to 26° C. and concentrated aqueous ammonia was added. Stirring was continued for 2 hours and the reaction mixture was allowed to stand overnight. The contents were transferred to a flask and rinsed with tetrahydrofuran (250 mL). The mixture was stirred, layers were separated, and the aqueous layer was saved. The organic layer was washed with brine (2.5 L) followed by brine/deionized (DI) water (1 L/1.5 L). The organic layer was washed with 9.7 M hydrochloric acid (HCl)/deionized water (0.25 L/2.25 L), followed by 9.7 M hydrochloric acid/deionized water (0.5 L/2.8 L), and 9.7 M hydrochloric acid/deionized water/brine (0.5 L/1.5 L/1.5 L). The organic layer was set aside while the combined aqueous layers were washed with tetrahydrofuran. The combined organic layers were washed with brine, dried with sodium sulfate (855 g) and filtered. The filtrate was evaporated to 1011 g of a wet (water), white solid. Methylene chloride was added and removed in vacuo. This procedure was repeated with ethyl acetate (6 L, then 2 L) to produce a solid residue (779 g). The residue was slurried in ethyl acetate and heptane, filtered, and dried in a vacuum oven to yield the desired amide (736 g, 98.7%) as a white solid mp 257-260° C.

후처리

  1. temperatureheated slowly
  2. temperatureto reflux
  3. temperatureto reflux for 2.5 hours
  4. waitto stand overnight
  5. customThe contents were transferred to a flask
  6. washrinsed with tetrahydrofuran (250 mL)
  7. stirringThe mixture was stirred
  8. customlayers were separated
  9. washThe organic layer was washed with brine (2.5 L)
  10. washThe organic layer was washed with 9.7 M hydrochloric acid (HCl)/deionized water (0.25 L/2.25 L)
  11. washwere washed with tetrahydrofuran
  12. washThe combined organic layers were washed with brine
  13. dry with materialdried with sodium sulfate (855 g)
  14. filtrationfiltered
  15. customThe filtrate was evaporated to 1011 g of a wet (water), white solid
  16. additionMethylene chloride was added
  17. customremoved in vacuo

출처 및 근거

ORD 기록
ord-6e888f28b2de427bbdc1d15a19286733
출처 데이터셋
uspto-grants-2002_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06448396B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트