Water → p-(1-Ethoxy ethoxy)styrene p-hydroxystyrene

HRID 129363

반응식

HRID 129363 반응식
[CH:1]#[C:2][C:3]1[CH:8]=[CH:7][C:6]([OH:9])=[CH:5][CH:4]=1.[CH:10]([O:12][CH2:13][CH3:14])=[CH2:11].O>O1CCOCC1.C1(C)C=CC(S([O-])(=O)=O)=CC=1.[NH+]1C=CC=CC=1>[CH2:10]([O:12][CH:13]([O:9][C:6]1[CH:7]=[CH:8][C:3]([CH:2]=[CH2:1])=[CH:4][CH:5]=1)[CH3:14])[CH3:11].[OH:9][C:6]1[CH:7]=[CH:8][C:3]([CH:2]=[CH2:1])=[CH:4][CH:5]=1

참가 물질

6

반응물 3

HCID 962WaterHCID 8023Ethyl vinyl etherHCID 327584-Ethynylphenol

생성물 1

HCID 67610320p-(1-Ethoxy ethoxy)styrene p-hydroxystyrene수율 94.5%

시약·촉매·용매 2

HCID 466102Benzenesulfonic acid, 4-methyl-, compd. with pyridine (1:1)촉매HCID 312751,4-Dioxane용매

실험 절차

A solution of poly(p-hydroxystyrene) (8.0 g) [MARUKA LYNCUR-M, manufactured by Maruzene Petrochemical Co., Ltd., having Mw 10000 and Mn 5000], ethyl vinyl ether (3.0 g) and pyridinium p-toluenesulfonate (0.5 g) in dioxane (70 ml) was reacted with stirring at room temperature for 24 hours. After reaction, the mixture was poured into H2O, was precipitated with stirring, and the precipitate was filtered, washed with H2O and then dried in vacuo. There was obtained 10.0 g of the desired product as a white powder having Mw 11000 (GPC with polystyrene calibration). The polymer was found to have p-(1-ethoxyethoxy)styrene unit and p-hydroxystyrene unit in a molar ratio of ca. 1:1 based on 1HNMR.

후처리

  1. customAfter reaction
  2. customwas precipitated
  3. stirringwith stirring
  4. filtrationthe precipitate was filtered
  5. washwashed with H2O
  6. customdried in vacuo

출처 및 근거

ORD 기록
ord-f82e1058d1564f108a6e4692f55f5f39
출처 데이터셋
uspto-grants-1995_11
특허 번호
US05468589

연결된 노트

불러오는 중…