홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sulfuric Acid → Di-tert-amylphenylphosphine

HRID 1297566
인쇄

반응식

HRID 1297566 반응식
[C:1]([P:6](Cl)[C:7]([CH2:10][CH3:11])([CH3:9])[CH3:8])([CH2:4][CH3:5])([CH3:3])[CH3:2].Cl[C:14]1[CH:19]=[CH:18][CH:17]=[CH:16][CH:15]=1.[Mg].S(=O)(=O)(O)O>O1CCCC1.C/C(/O)=C/C(C)=O.C/C(/O)=C/C(C)=O.[Cu].C1(C)C=CC=CC=1>[C:1]([P:6]([C:7]([CH2:10][CH3:11])([CH3:9])[CH3:8])[C:14]1[CH:19]=[CH:18][CH:17]=[CH:16][CH:15]=1)([CH2:4][CH3:5])([CH3:3])[CH3:2]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 1118Sulfuric AcidHCID 7964ChlorobenzeneHCID 5462224MagnesiumHCID 23032008Di-tert-amylphosphinous chloride2회

생성물 1

HCID 22925456Di-tert-amylphenylphosphine수율 95.9%

시약·촉매·용매 3

HCID 5363992
Copper, bis(2,4-pentanedionato-O,O')-, (SP-4-1)-
촉매
HCID 1140Toluene용매
HCID 8028Tetrahydrofuran용매2회

실험 절차

In a 300 ml four-necked flask thoroughly purged with nitrogen, 20 ml of tetrahydrofuran, 10.4 g (0.050 mol) of di-tert-amylphosphinous chloride and 0.13 g (0.0005 mol (corresponding to 1% by mol)) of copper(II) acetylacetonate were placed. To the contents of the flask, a Grignard reagent solution previously prepared from 6.8 g (0.060 mol) of chlorobenzene and 1.9 g (0.080 mol) of metallic magnesium in 45 ml of tetrahydrofuran was dropwise added over a period of 1 hour with maintaining the temperature at 40° C. to 45° C. After the dropwise addition was completed, stirring was conducted at the same temperature for 3 hours. After the temperature of the reaction solution was returned to room temperature, gas chromatography analysis was carried out, and as a result, di-tert-amylphosphinous chloride was present in trace amounts. Thereafter, 20 ml of toluene and 20 ml of a 5% sulfuric acid aqueous solution were added to the reaction solution to perform liquid separation. Then, the organic layer was washed with water and dried over anhydrous sodium sulfate. The solvent and a low-boiling component were distilled off under reduced pressure to obtain 12.0 g (purity: 94.4%) of the aimed di-tert-amylphenylphosphine as a viscous oily substance. The yield was 90.5%.

후처리

  1. additionwas dropwise added over a period of 1 hour
  2. temperaturewith maintaining the temperature at 40° C. to 45° C
  3. additionAfter the dropwise addition
  4. customwas returned to room temperature
  5. customliquid separation
  6. washThen, the organic layer was washed with water
  7. dry with materialdried over anhydrous sodium sulfate
  8. distillationThe solvent and a low-boiling component were distilled off under reduced pressure

출처 및 근거

ORD 기록
ord-11f85162040a4f4dbb434f16e2807057
출처 데이터셋
uspto-grants-2007_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07250535B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트