홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrogen Peroxide → Acrylic acid hydroxyethyl acrylate

HRID 131086
인쇄

반응식

HRID 131086 반응식
OO.O.[PH2]([O-])=O.[Na+].[C:8]([OH:12])(=[O:11])[CH:9]=[CH2:10].[OH:13][CH2:14][CH2:15][O:16][C:17](=[O:20])[CH:18]=[CH2:19].C(O)[C@@H](O)[C@H]1OC(=O)C(O)=C1O>[Fe].O>[C:8]([OH:12])(=[O:11])[CH:9]=[CH2:10].[OH:13][CH2:14][CH2:15][O:16][C:17](=[O:20])[CH:18]=[CH2:19]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 5

HCID 784Hydrogen Peroxide2회HCID 6581Acrylic AcidHCID 131652-Hydroxyethyl acrylateHCID 54675810Erythorbic Acid2회HCID 178418950HCID 178418950, 화합물

생성물 1

HCID 86591133Acrylic acid hydroxyethyl acrylate

시약·촉매·용매 2

HCID 23925Iron촉매
HCID 962Water용매5회

반응 조건

온도
70 °C

실험 절차

An aqueous polymer solution of 70/30 (glacial acrylic acid/2-hydroxylethylacrylate) was prepared by charging 600 g water, 5.6 g 50% hydrogen peroxide, 0.1 g DISSOLVINE 4.5% iron solution, and 16 g sodium hypophosphite monohydrate to a reaction vessel and heated to 70° C. A blend of 364 g glacial acrylic acid and 156 g 2-hydroxylethylacrylate (2-HEA) was uniformly added to the reactor over a three hour period using mechanical agitation. At the same time, additional mixtures of 60 g water and 5.4 g 50% hydrogen peroxide, and a mixture of 60 g water and 4 g erythorbic acid were uniformly fed into the reactor over a 3.5 hour period. After completion of the feeds, the reactor content was heated an additional 30 minutes at 70° C. The reactor was then charged with a mixture of 12 g water and 1.5 g tetrabutylhydrogen peroxide, and a mixture of 12 g water and 1 g erythorbic acid and stirred an additional 15 minutes at 70° C.

후처리

  1. temperaturethe reactor content was heated an additional 30 minutes at 70° C

출처 및 근거

ORD 기록
ord-9a574ff346b04ff49133d1945f9aca50
출처 데이터셋
uspto-grants-2008_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07384881B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트