홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Sulfuric Acid → HCID 9899903, 화합물

HRID 1359504
노트
인쇄 미리보기

반응식

HRID 1359504 반응식
S(=O)(=O)(O)[OH:2].[F:6][C:7]([F:22])([F:21])[C:8]1[CH:13]=[CH:12][C:11]([NH:14][C@H:15]([CH2:19][CH3:20])[CH2:16][C:17]#[N:18])=[CH:10][CH:9]=1>C1(C)C=CC=CC=1>[F:6][C:7]([F:21])([F:22])[C:8]1[CH:9]=[CH:10][C:11]([NH:14][C@H:15]([CH2:19][CH3:20])[CH2:16][C:17]([NH2:18])=[O:2])=[CH:12][CH:13]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 1118Sulfuric AcidHCID 9856211(3R)-3-(4-Trifluoromethyl-phenylamino)-pentanenitrile

생성물 1

HCID 9899903HCID 9899903, 화합물수율 75%

시약·촉매·용매 1

HCID 1140Toluene용매

반응 조건

온도
35 °C

실험 절차

Aqueous sulfuric acid (8.2 L sulfuric acid and 1.1 L water premixed and cooled to 35° C. or less) was added to the crude toluene solution of (3R)-3-(4-trifluoromethyl-phenylamino)-pentanenitrile from Example 1. The resulting bilayer was stirred well and heated to 35° C. for 17 hours. The lower aqueous layer was collected and quenched with aqueous sodium hydroxide (95 L water and 10.7 kg sodium hydroxide) and diisopropyl ether (IPE) (40 L). After extraction and removal of the aqueous layer, the organic layer was combined and extracted with saturated aqueous NaHCO3 (10 L). The organic phase from the resulting bilayer was concentrated by distillation to a volume of 19 L. The solution was then cooled to room temperature and seeded with (3R)-3-(4-trifluoromethyl-phenylamino)-pentanoic acid amide and allowed to granulate for 3 hours while stirring. To the heterogenous mixture was added cyclohexane (38 L) and the mixture was granulated for an additional 11 hours. The solids were filtered, rinsed with cyclohexane (4 L), dried under vacuum at 40° C. to afford 3021 g (75%) of the title compound.

후처리

  1. customThe lower aqueous layer was collected
  2. customquenched with aqueous sodium hydroxide (95 L water and 10.7 kg sodium hydroxide) and diisopropyl ether (IPE) (40 L)
  3. extractionAfter extraction and removal of the aqueous layer
  4. extractionextracted with saturated aqueous NaHCO3 (10 L)
  5. concentrationThe organic phase from the resulting bilayer was concentrated by distillation to a volume of 19 L
  6. temperatureThe solution was then cooled to room temperature
  7. stirringwhile stirring
  8. additionTo the heterogenous mixture was added cyclohexane (38 L)
  9. waitthe mixture was granulated for an additional 11 hours
  10. filtrationThe solids were filtered
  11. washrinsed with cyclohexane (4 L)
  12. customdried under vacuum at 40° C.

출처 및 근거

ORD 기록
ord-9ee44cbb62fe40c08ee5fd9071622b31
출처 데이터셋
uspto-grants-2003_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06600045B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트