홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ethyl 4-(3-fluoro-2-methoxyphenyl)-2-hydroxy-2-(trifluoromethyl)pent-4-enoate → Ethyl 4-(3-fluoro-2-methoxyphenyl)-2-hydroxy-2-(trifluoromethyl)pentanoate

HRID 1362466
인쇄

반응식

HRID 1362466 반응식
[F:1][C:2]1[C:3]([O:22][CH3:23])=[C:4]([C:8](=[CH2:21])[CH2:9][C:10]([OH:20])([C:16]([F:19])([F:18])[F:17])[C:11]([O:13][CH2:14][CH3:15])=[O:12])[CH:5]=[CH:6][CH:7]=1.[H][H]>CO.C(O)(=O)C.[Pd]>[F:1][C:2]1[C:3]([O:22][CH3:23])=[C:4]([CH:8]([CH3:21])[CH2:9][C:10]([OH:20])([C:16]([F:19])([F:18])[F:17])[C:11]([O:13][CH2:14][CH3:15])=[O:12])[CH:5]=[CH:6][CH:7]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 2

HCID 66969352Ethyl 4-(3-fluoro-2-methoxyphenyl)-2-hydroxy-2-(trifluoromethyl)pent-4-enoateHCID 178418361HCID 178418361, 화합물

생성물 1

HCID 66969248Ethyl 4-(3-fluoro-2-methoxyphenyl)-2-hydroxy-2-(trifluoromethyl)pentanoate수율 95.9%

시약·촉매·용매 3

HCID 23938Palladium촉매HCID 176Acetic Acid용매
HCID 887
Methanol
용매

실험 절차

1.56 g (5.7 mmol) of 1,1′-bi-2-naphthol are admixed with 5.7 ml (2.85 mmol) of a 0.5 M titanium tetraisopropoxide solution in toluene and the red solution is stirred for 2 hours at room temperature. 9.5 g (57.2 mmol) of 2-fluoro-6-(1-methyleneethyl)anisole and 12.5 ml (95 mmol) of ethyl trifluoropyruvate are added and the mixture is heated at 140° C. for 18 hours. After cooling it is immediately purified by column chromatography on silica gel (hexane/ethyl acetate 0-5%) to give 8.9 g of ethyl 4-(3-fluoro-2-methoxyphenyl)-2-hydroxy-2-(trifluoromethyl)pent-4-enoate. 8.9 g (26.5 mmol) of ethyl 4-(3-fluoro-2-methoxyphenyl)-2-hydroxy-2-(trifluoromethyl)pent-4-enoate are dissolved in 200 ml of methanol and 2 ml of acetic acid, and 890 mg of palladium on carbon (10%) are added. The suspension is shaken for 1.5 hours under a hydrogen atmosphere under atmospheric pressure until the hydrogen uptake is 560 ml. The mixture is filtered through Celite, the filter bed being rinsed thoroughly with ethyl acetate. Removal of the solvent gives 8.6 g of ethyl 4-(3-fluoro-2-methoxyphenyl)-2-hydroxy-2-(trifluoromethyl)pentanoate. 8.6 g (25.4 mmol) of ethyl 4-(3-fluoro-2-methoxyphenyl)-2-hydroxy-2-(trifluoromethyl)-pentanoate in 350 ml of diethyl ether are cooled to −30° C. and over 15 minutes 1.7 g (44.7 mmol) of lithium aluminum hydride in solid form are added in portions. The mixture is stirred for 1.5 hours, in the course of which the temperature climbs to −15° C., followed by dropwise addition in succession of ethyl acetate and water and by a further hour of stirring until a readily filterable precipitate has formed. The suspension is filtered through Celite, the filter bed being thoroughly rinsed with ethyl acetate. The phases of the filtrate are separated and extraction is carried out again with ethyl acetate. The extracts are washed with saturated sodium chloride solution and dried over sodium sulphate and the solvent is removed in vacuo. Separation by column chromatography on silica gel (hexane/diisopropyl ether 0-15%) yields 3.1 g of (2R*,4R*)-4-(3-fluoro-2-methoxyphenyl)-2-hydroxy-2-(trifluoromethyl)pentanal

후처리

  1. filtrationThe mixture is filtered through Celite
  2. washthe filter bed being rinsed thoroughly with ethyl acetate
  3. customRemoval of the solvent

출처 및 근거

ORD 기록
ord-e04aa8781eae4bd4bfec23a3d3b953c0
출처 데이터셋
uspto-grants-2011_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07880042B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트