홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Alpha-Methylstyrene → alpha-Methylstyrene isopropenyltoluene

HRID 1370152
인쇄

반응식

HRID 1370152 반응식
[C:1]([C:4]1[CH:9]=[CH:8][CH:7]=[CH:6][C:5]=1[CH3:10])([CH3:3])=[CH2:2].[CH3:11][C:12]([C:14]1[CH:19]=[CH:18][CH:17]=[CH:16][CH:15]=1)=[CH2:13]>C1(C)C=CC=CC=1>[C:1]([C:4]1[CH:9]=[CH:8][CH:7]=[CH:6][C:5]=1[CH3:10])([CH3:3])=[CH2:2].[CH3:13][C:12]([C:14]1[CH:19]=[CH:18][CH:17]=[CH:16][CH:15]=1)=[CH2:11]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 7407Alpha-Methylstyrene2회HCID 81886O,alpha-dimethylstyrene2회

생성물 1

HCID 86585334alpha-Methylstyrene isopropenyltoluene

시약·촉매·용매 1

HCID 1140Toluene용매3회

실험 절차

A mixture of isopropenyl toluene, α-methyl styrene, and dehydrated and refined toluene (volume ratio=total amount of monomers:toluene=1:1) and boron trifluoride phenolate complex diluted to ten times with dehydrated and refined toluene (1.7 times equivalent as phenol) were continuously fed into an autoclave having an actual capacity of 1270 ml equipped with mixing blades. The polymerization reaction was carried out at the reaction temperature of 5° C. The mol ratio of isopropenyl toluene to α-methyl styrene was 50:50. The feeding rate of the mixture of monomers and toluene was 1.0 liter/hour, and that of the diluted catalyst was 70 milliliters/hour. Next, the reactant mixture was transferred into the second stage autoclave so as to continue polymerization reaction at 5° C. When the total residence time in the first and second stage autoclaves reached two hours, the reactant mixture was discharged continuously. When three times as much time as that of the residence time elapsed, one liter of the reactant mixture was sampled and the polymerization reaction was terminated. After termination of polymerization, one normal NaOH aqueous solution was added to the sampled reactant mixture so as to deash the residual catalyst. The obtained reactant mixture was further washed five times using a large amount of water. Solvent and un-reacted monomers were removed by vacuum distillation in an evaporator to obtain isopropenyl toluene-α-methyl styrene copolymer (1). This isopropenyl toluene-α-methyl styrene copolymer (1) had these properties: softening point Tm=145° C., number average molecular weight Mn=1420, and weight average molecular weight Mw=2430.

후처리

  1. customequipped with mixing blades
  2. customThe polymerization reaction
  3. customwas carried out at the reaction temperature of 5° C
  4. custompolymerization reaction at 5° C
  5. customthe polymerization reaction
  6. customwas terminated
  7. customAfter termination of polymerization, one normal NaOH aqueous solution
  8. additionwas added to the sampled reactant mixture so as
  9. washThe obtained reactant mixture was further washed five times
  10. customSolvent and un-reacted monomers
  11. customwere removed by vacuum distillation in an evaporator

출처 및 근거

ORD 기록
ord-0dfd161a792f49efbb1a859411ec6174
출처 데이터셋
uspto-grants-2003_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06582865B1

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트