홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ethanol → 3-(4-Pyridinylamino)-1h-indole-2-carboxylic acid potassium salt

HRID 1376116
인쇄

반응식

HRID 1376116 반응식
C([O:3][C:4]([C:6]1[NH:7][C:8]2[C:13]([C:14]=1[NH2:15])=[CH:12][CH:11]=[CH:10][CH:9]=2)=[O:5])C.C(O)C.[OH-].[K+:20].[K+].NC1[C:31]2[C:26](=C[CH:28]=[CH:29][CH:30]=2)[NH:25]C=1C([O-])=O>O.C(#N)C>[K+:20].[N:25]1[CH:26]=[CH:31][C:30]([NH:15][C:14]2[C:13]3[C:8](=[CH:9][CH:10]=[CH:11][CH:12]=3)[NH:7][C:6]=2[C:4]([O-:3])=[O:5])=[CH:29][CH:28]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 702EthanolHCID 14797Potassium HydroxideHCID 732887Ethyl 3-amino-1H-indole-2-carboxylate2회HCID 236745823-Amino-1h-indole-2-carboxylic acid potassium salt

생성물 1

HCID 690066653-(4-Pyridinylamino)-1h-indole-2-carboxylic acid potassium salt수율 140%

시약·촉매·용매 2

HCID 962
Water
용매
HCID 6342Acetonitrile용매

반응 조건

온도
75 °C

실험 절차

Charge a mixture of 7.50 kg (26.66 mol) of 3-amino-1H-indole-2-carboxylic acid ethyl ester, 37.5L of ethanol and 37.5 L of 4M KOH to a 30-gal reactor and heat to 75° C. over 30 min. Monitor the progress of the reaction by HPLC (Column—150×3.9 mm Waters Symmetry C18, 5 micron; mobile phase—20% acetonitrile/80% 0.1% TFA in water; flow rate—1.0 mL/min; wavelength—225 nm; RT: 3-amino-1H-indole-2-carboxylic acid potassium salt—3.3 min; 3-amino-1H-indole-2-carboxylic acid ethyl ester—6.0 min). Typically achieve, a 100% conversion within 3 h. Cool the mixture to 25° C. over 2 h and concentrate at 50–60° C./50 torr to a residue. Add a total of 37.5 L of water and heat the mixture to and hold at 85° C. for 30 min. Cool the mixture to 10° C. over 2 hours, and then further cool to and hold at 5° C. for 2 hours. Filter off the solid that forms, wash with a total of 10 L of 4M KOH solution and air dry. Further dry the solid at 35° C. in a forced air oven for 72 h to give 10.9 kg, 140% yield of the title compound: HPLC analysis 70.7% pure.

후처리

  1. additionCharge
  2. temperatureCool the mixture to 25° C. over 2 h
  3. concentrationconcentrate at 50–60° C./50 torr to a residue
  4. additionAdd a total of 37.5 L of water
  5. temperatureheat the mixture to and
  6. waithold at 85° C. for 30 min
  7. temperatureCool the mixture to 10° C. over 2 hours
  8. temperaturefurther cool to and
  9. waithold at 5° C. for 2 hours
  10. filtrationFilter off the solid that forms
  11. washwash with a total of 10 L of 4M KOH solution and air
  12. customdry
  13. customFurther dry the solid at 35° C. in a forced air oven for 72 h

출처 및 근거

ORD 기록
ord-e9072bbacf5049c99e6d8034ddef78be
출처 데이터셋
uspto-grants-2007_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07169925B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트