홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Acetone → 3-(2,4-dichlorophenyl)-6-methyl-2(1H)-pyridone

HRID 1385924
인쇄

반응식

HRID 1385924 반응식
[Cl:1][C:2]1[CH:7]=[C:6]([Cl:8])[CH:5]=[CH:4][C:3]=1[C:9](=[CH:12]O)[C:10]#[N:11].[CH3:14][C:15]([CH3:17])=O.[OH-:18].[K+]>C(OCC)(=O)C>[Cl:1][C:2]1[CH:7]=[C:6]([Cl:8])[CH:5]=[CH:4][C:3]=1[C:9]1[C:10](=[O:18])[NH:11][C:15]([CH3:17])=[CH:14][CH:12]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 180AcetoneHCID 14797Potassium HydroxideHCID 14830692-(2,4-Dichlorophenyl)-3-hydroxyprop-2-enenitrile

생성물 1

HCID 184083253-(2,4-dichlorophenyl)-6-methyl-2(1H)-pyridone수율 45%

시약·촉매·용매 1

HCID 8857Ethyl Acetate용매

반응 조건

온도
130 °C

실험 절차

α-(2,4-dichlorophenyl)-α-hydroxymethylene acetonitrile and 8.8 g of acetone were thoroughly mixed with 110 g of polyphosphoric acid, and the mixture was heated to about 130° C. At this temperature, an exothermic reaction started. The temperature was maintained from 130 to 140° C. for 30 minutes, while heating as the case required. The cooled mixture was poured into ice water, and this suspension was stirred for 18 hours. This crude product was stirred with ethyl acetate and an excess amount of a dilute aqueous potassium hydroxide solution to make it alkaline. The formed precipitate was collected by filtration and washed sequentially with water, ethyl acetate and diethyl ether to obtain 8.0 g (yield: 45%) of the desired product. Melting point: 266-268° C.

후처리

  1. customAt this temperature, an exothermic reaction
  2. temperatureThe temperature was maintained from 130 to 140° C. for 30 minutes
  3. temperaturewhile heating as the case
  4. filtrationThe formed precipitate was collected by filtration
  5. washwashed sequentially with water, ethyl acetate and diethyl ether

출처 및 근거

ORD 기록
ord-84a3878e17584c83b2b6ef130b887074
출처 데이터셋
uspto-grants-2001_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06265349B1

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트