홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sulfuric Acid → 3-(3,4-Dichlorophenyl)-3-phenylpropionic acid

HRID 1387760
인쇄

반응식

HRID 1387760 반응식
[Cl:1][C:2]1[CH:3]=[C:4]([CH:10]=[CH:11][C:12]=1[Cl:13])[CH:5]=[CH:6][C:7]([OH:9])=[O:8].S(=O)(=O)(O)O>C1C=CC=CC=1>[Cl:1][C:2]1[CH:3]=[C:4]([CH:5]([C:2]2[CH:3]=[CH:4][CH:10]=[CH:11][CH:12]=2)[CH2:6][C:7]([OH:9])=[O:8])[CH:10]=[CH:11][C:12]=1[Cl:13]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 1118Sulfuric AcidHCID 145483-(3,4-Dichlorophenyl)prop-2-enoic acid2회

생성물 1

HCID 30189213-(3,4-Dichlorophenyl)-3-phenylpropionic acid

시약·촉매·용매 1

HCID 241Benzene용매

반응 조건

온도
90 °C

실험 절차

A mixture of 3,4-dichlorocinnamic acid (50 g, 0.23 mole), benzene (150 mL) and concentrated sulfuric acid (100 mL) was stirred (using air driven overhead stirrer) in a 500 mL 3-neck round bottom flask while maintaining a reaction temperature of 85-95° C. The progress of the reaction was followed by HPLC. When the level of 3,4-dichlorocinnamic acid was <1% by HPLC (approximately 24 h), the reaction mixture was cooled to room temperature, then slowly poured into ice (300 g). The mixture was stirred for 30 min. then transferred into a 2 L separatory funnel. The organic layer was separated from the aqueous layer, and the aqueous layer was extracted with ethyl acetate (2×300 mL). The organic layers were combined, washed with water (5×500 mL) and brine (2×400 mL), then concentrated under reduced pressure. Ethyl acetate (500 mL) was added to the concentrate and the solution was evaporated to dryness. The product was dried under high vacuum at room temperature for 24 h. The desired carboxylic acid was obtained as a thick oil (65.8 g, 96% yield).

후처리

  1. customby HPLC (approximately 24 h)
  2. temperaturethe reaction mixture was cooled to room temperature
  3. stirringThe mixture was stirred for 30 min.
  4. customthen transferred into a 2 L separatory funnel
  5. customThe organic layer was separated from the aqueous layer
  6. extractionthe aqueous layer was extracted with ethyl acetate (2×300 mL)
  7. washwashed with water (5×500 mL) and brine (2×400 mL)
  8. concentrationconcentrated under reduced pressure
  9. additionEthyl acetate (500 mL) was added to the
  10. concentrationconcentrate
  11. customthe solution was evaporated to dryness
  12. customThe product was dried under high vacuum at room temperature for 24 h

출처 및 근거

ORD 기록
ord-d55bf4895cc7430ea05914e5cb091283
출처 데이터셋
uspto-grants-2001_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06268535B1

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트