홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Urea → Methyl phenylcarbamate

HRID 1388218
인쇄

반응식

HRID 1388218 반응식
[NH2:1][C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1.C1(N[C:15](NC2C=CC=CC=2)=[O:16])C=CC=CC=1.N[C:25](N)=[O:26]>CCCCCCCC([O-])=O.CCCCCCCC([O-])=O.[Zn+2].CO>[CH3:25][O:26][C:15](=[O:16])[NH:1][C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 1176Urea2회HCID 6115AnilineHCID 7595Carbanilide

생성물 1

HCID 17451Methyl phenylcarbamate

시약·촉매·용매 2

HCID 11180Zinc Caprylate촉매HCID 887Methanol용매

실험 절차

Following the procedure described in Example 1, 745 g of aniline, 255 g of N,N'-diphenyl urea, 481 g of urea, 1333 g of methanol and 6.0 g of zinc octoate were reacted for 3.5 hours at 200° C. in the pressure apparatus described in Example 1. The mixture was then cooled and, after the apparatus had been vented, another 72 g of urea were added. The mixture was then reheated and reacted for 4 hours at 200° C. After cooling and venting of the apparatus, the mixture was removed, filtered and subjected to fractional distillation. Most of the methanol excess was separated off at atmospheric pressure. The product was then distilled at 0.2 mbar. 1323 g (84.1% of the theoretical yield) of N-phenyl carbamic acid methyl ester melting at from 45° to 47° C. were obtained.

후처리

  1. customwere reacted for 3.5 hours at 200° C. in the pressure apparatus
  2. temperatureThe mixture was then cooled
  3. customreacted for 4 hours at 200° C
  4. temperatureAfter cooling
  5. customthe mixture was removed
  6. filtrationfiltered
  7. distillationsubjected to fractional distillation
  8. customMost of the methanol excess was separated off at atmospheric pressure
  9. distillationThe product was then distilled at 0.2 mbar

출처 및 근거

ORD 기록
ord-2b289b9c3c4044399548a646d78b86a9
출처 데이터셋
uspto-grants-1984_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04430505

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트