홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → (2-Chloroethyl)-1,2,3,4-tetramethylcyclopentadiene

HRID 1421138
인쇄

반응식

HRID 1421138 반응식
[CH3:1][C:2]1[CH2:6][C:5]([CH3:7])=[C:4]([CH3:8])[C:3]=1[CH3:9].C([Li])CCC.Br[CH2:16][CH2:17][Cl:18].O>C(OCC)C>[CH3:1][C:2]1[CH:6]([CH2:16][CH2:17][Cl:18])[C:5]([CH3:7])=[C:4]([CH3:8])[C:3]=1[CH3:9]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 962WaterHCID 78491-Bromo-2-ChloroethaneHCID 1381631,2,3,4-Tetramethylcyclopentadiene2회HCID 178418339Butyllithium

생성물 1

HCID 11019555(2-Chloroethyl)-1,2,3,4-tetramethylcyclopentadiene

시약·촉매·용매 1

HCID 3283Diethyl Ether용매

반응 조건

온도
2 °C

실험 절차

A 1-liter three-necked flask, provided with a dropping funnel, condenser, mechanical stirrer and nitrogen inlet, was charged with 30.5 g of 1,2,3,4-tetramethylcyclopentadiene (0.25 mol), dissolved in 700 mL of ethoxyethane, and cooled to 2° C. Then 160 mL of n-butyllithium (1.6 M in hexane; 0.26 mol) were added dropwise in two hours, followed by 18 hours of stirring at room temperature with the aid of a mechanical stirrer. Then 36.0 g of 1-bromo-2-chloroethane (0.25 mol) were added all at once. The reaction mixture was stirred at room temperature for 10 days. GC analysis of a sample showed that the conversion of the tetramethylcyclopentadiene was 91%. One hundred ml of water were added to the reaction mixture, followed by separation of the water phase and the organic phase. The organic layer was washed once with 50 mL of saturated aqueous sodium chloride solution, dried with sodium sulphate, filtered and boiled down. The residue (43.9 g) proved to have the following composition according to gas chromatography (GC) analysis: apart from the starting materials, 1-bromo-2-chloroethane (9 wt %) and 1,2,3,4-tetramethylcyclopentadiene (9 wt %). Only non-geminally coupled product (84%) and geminally coupled product (16%) were found to be present.

후처리

  1. customA 1-liter three-necked flask, provided with a dropping funnel, condenser, mechanical stirrer and nitrogen inlet
  2. stirringThe reaction mixture was stirred at room temperature for 10 days
  3. customfollowed by separation of the water phase
  4. washThe organic layer was washed once with 50 mL of saturated aqueous sodium chloride solution
  5. dry with materialdried with sodium sulphate
  6. filtrationfiltered

출처 및 근거

ORD 기록
ord-8e9a4ac44344400685d560159fbbeec9
출처 데이터셋
uspto-grants-2000_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06072067

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트