Iodine → HCID 10890716, 화합물

온도

60 °C

A 500-ml four-necked round bottom flask equipped with thermometer, mechanical stirrer, Dimroth condenser and chlorine-introducing tube was charged with 570.0 g (2.5 mol) of o-trifluoromethylbenzalchloride, 11.5 g (2.5 mol %) of ferric chloride and 1.5 g (0.5 mol %) of iodine. Then, the reaction temperature was raised to 60° C. while the mixture was kept stirred. When the reaction temperature reached 60° C., chlorination was started by continuously introducing chlorine at a rate of 0.5 mol/hr. After the lapse of 2 hr, the reaction temperature was raised to 80° C., and then the reaction was continued for another 5 hr. After the 7-hr reaction, conversion was 97.0%. Then, the reaction liquid was put into a 1000-ml separating funnel, and washed two times with 500 ml of water. The mixed liquid was allowed to separate into two layers and the aqueous layer was removed. The organic phase was dried with magnesium sulfate, and then magnesium sulfate was removed by vacuum filtration. As the result, 634.2 g of 2-trifluoromethyl-4-chlorobenzalchloride (purity: 72.1%) was obtained. The yield of this product was 69.4%. The product was analyzed by gas chromatography, and the result is as follows.

1. additionintroducing tube
2. customreached 60° C.
3. temperatureAfter the lapse of 2 hr, the reaction temperature was raised to 80° C.
4. customAfter the 7-hr reaction, conversion
5. customThen, the reaction liquid
6. customseparating funnel
7. washwashed two times with 500 ml of water
8. customto separate into two layers
9. customthe aqueous layer was removed
10. dry with materialThe organic phase was dried with magnesium sulfate
11. custommagnesium sulfate was removed by vacuum filtration

ORD 기록

ord-612ccd49c9634d76a65f2426b4fdf126

출처 데이터셋

uspto-grants-1997_02

DOI

10.6084/m9.figshare.5104873.v1

특허 번호

US05600036