홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Benzyl Bromide → 1-Benzyl-2,5-dimethoxy-3,4,6-trimethylbenzene

HRID 1464520
인쇄

반응식

HRID 1464520 반응식
C([Li])CCC.CCCCCC.Br[C:13]1[C:18]([CH3:19])=[C:17]([O:20][CH3:21])[C:16]([CH3:22])=[C:15]([CH3:23])[C:14]=1[O:24][CH3:25].[CH2:26](Br)[C:27]1[CH:32]=[CH:31][CH:30]=[CH:29][CH:28]=1>O1CCCC1>[CH2:26]([C:13]1[C:18]([CH3:19])=[C:17]([O:20][CH3:21])[C:16]([CH3:22])=[C:15]([CH3:23])[C:14]=1[O:24][CH3:25])[C:27]1[CH:32]=[CH:31][CH:30]=[CH:29][CH:28]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 7498Benzyl BromideHCID 8058HexaneHCID 2973651-Bromo-2,5-dimethoxy-3,4,6-trimethylbenzeneHCID 178418339Butyllithium

생성물 1

HCID 190880201-Benzyl-2,5-dimethoxy-3,4,6-trimethylbenzene수율 83%

시약·촉매·용매 1

HCID 8028Tetrahydrofuran
용매
2회

실험 절차

A 24.1 ml (38.6 mmole) of n-butyllithium.hexane solution was added dropwise to 10.0 g (38.6 mmole) of 1-bromo-2,5-dimethoxy-3,4,6-trimethylbenzene dissolved in anhydrous tetrahydrofuran (100 ml), under an atmosphere of argon at -40° C. over the period of 10 minutes, followed by stirring for another 20 minutes. Then, 3.32 g (38.6×0.6 mmole) of cuprous bromide was added, followed by stirring at -40° to -20° C. for 1 hour. After addition of a solution of 6.60 g (38.6 mmole) of benzyl bromide in tetrahydrofuran (15 ml), the cooling bath was removed, the reaction solution was stirred at 70° C. for 1 hour and cooled with ice, followed by addition of 1N hydrochloric acid (50 ml) and stirring. The tetrahydrofuran was distilled off under reduced pressure, and isopropyl ether was added to the residue. The insoluble matter was filtered through a bed of Hyflo Supercell, and the isopropyl ether layer was separated out, washed with water and aqueous sodium chloride solution successively, dried (magnesium sulfate) and evaporated. The residual solution was distilled under reduced pressure to give 8.62 g (83%) of 1-benzyl-2,5-dimethoxy-3,4,6-trimethylbenzene, b.p. 140°-142° C. (0.3 torr) and m.p. 70° to 71° C.

후처리

  1. stirringby stirring at -40° to -20° C. for 1 hour
  2. customthe cooling bath was removed
  3. stirringthe reaction solution was stirred at 70° C. for 1 hour
  4. temperaturecooled with ice
  5. additionfollowed by addition of 1N hydrochloric acid (50 ml)
  6. stirringstirring
  7. distillationThe tetrahydrofuran was distilled off under reduced pressure, and isopropyl ether
  8. additionwas added to the residue
  9. filtrationThe insoluble matter was filtered through a bed of Hyflo Supercell
  10. customthe isopropyl ether layer was separated out
  11. washwashed with water and aqueous sodium chloride solution successively
  12. dry with materialdried (magnesium sulfate)
  13. customevaporated
  14. distillationThe residual solution was distilled under reduced pressure

출처 및 근거

ORD 기록
ord-54356e57a9bc4741bda826d1fec105f1
출처 데이터셋
uspto-grants-1994_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05304658

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트