홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Diethyl Ether → Manganese cyclopentadienyl tricarbonyl

HRID 1494663
노트
인쇄 미리보기

반응식

HRID 1494663 반응식
[C:1]([O-])(=[O:3])C.[Mn+2:5].[C:6]([O-])(=[O:8])C.[CH:10]1[CH2:14][CH:13]=[CH:12][CH:11]=1.C[CH2:16][O:17]CC>CCCCC>[C-:1]#[O+:3].[C-:6]#[O+:8].[C-:16]#[O+:17].[CH-:10]1[CH:14]=[CH:13][CH:12]=[CH:11]1.[Mn:5]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 3283Diethyl Ether2회HCID 7612CyclopentadieneHCID 12525Manganous Acetate

생성물 1

HCID 61551Manganese cyclopentadienyl tricarbonyl수율 54%

시약·촉매·용매 1

HCID 8003Pentane용매

반응 조건

온도
-78 °C

실험 절차

A 300 ml stainless steel autoclave was charged with 2.00 g manganese (II) acetate (11.6 mmol), 3.07 g cyclopentadiene monomer (46.5 mmol), 70 ml ether, and 4.0 g TEA (35.1 mmol) pre-mixed with some of the ether. The autoclave was sealed and purged with CO. The carbonylation was carried out at 550 psi total pressure and a temperature of 175° C. for two hours. The cooled reactor was vented and the contents transferred to an Erlenmeyer flask. A solution of 10% HCl was added carefully until the salts dissolved. The organic layer was separated and washed with water, dried (MgSO4), filtered and evaporated leaving a red oil. Pentane (100 ml) was added. Cooling to -78° C. for several hours gave 1.10 g (54%) of cyclopentadienylmanganese tricarbonyl product as yellow crystals, mp 65°-69° C.

후처리

  1. customThe autoclave was sealed
  2. custompurged with CO
  3. additionA solution of 10% HCl was added carefully until the salts
  4. dissolutiondissolved
  5. customThe organic layer was separated
  6. washwashed with water
  7. dry with materialdried (MgSO4)
  8. filtrationfiltered
  9. customevaporated
  10. customleaving a red oil

출처 및 근거

ORD 기록
ord-850106dea43e40e5a904dd9723bd50a1
출처 데이터셋
uspto-grants-1991_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05026885

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트