홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Acetone → 3-Nitro-1-(4-octylphenyl)propan-1-one

HRID 1505023
인쇄

반응식

HRID 1505023 반응식
Cl[CH2:2][CH2:3][C:4]([C:6]1[CH:11]=[CH:10][C:9]([CH2:12][CH2:13][CH2:14][CH2:15][CH2:16][CH2:17][CH2:18][CH3:19])=[CH:8][CH:7]=1)=[O:5].CC(C)=O.[N:24]([O-:26])=[O:25].[Na+].CCCCCC>O>[N+:24]([CH2:2][CH2:3][C:4]([C:6]1[CH:11]=[CH:10][C:9]([CH2:12][CH2:13][CH2:14][CH2:15][CH2:16][CH2:17][CH2:18][CH3:19])=[CH:8][CH:7]=1)=[O:5])([O-:26])=[O:25]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 180AcetoneHCID 8058HexaneHCID 23668193Sodium Nitrite2회HCID 707007193-Chloro-1-(4-octylphenyl)propan-1-one

생성물 1

HCID 715785353-Nitro-1-(4-octylphenyl)propan-1-one

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
80 °C

실험 절차

3-Chloro-1-(4-octylphenyl)propan-1-one (110 g) and acetone (1 L) are charged into a round bottom flask equipped with a condenser and guard tube and stirred. Sodium nitrite (271 g) is added and the mixture is slowly heated to 80° C. and maintained at that temperature for about 21 hours. The mass is cooled to 58° C., sodium nitrite (10 g) is added, and the mass is maintained at 78° C. for about 6 hours. The solvent is evaporated under reduced pressure. The compound obtained is diluted with water (250 mL) and extracted with ethyl acetate (2×500 mL). The combined organic layer is dried over anhydrous sodium sulphate (50 g) and concentrated under reduced pressure to give solid. Hexane (500 mL) is added and the mixture is cooled to −10° C. and stirred for 20 minutes. The formed solid is separated by filtration and washed with cold hexane (2×100 mL) to obtain the title compound as an off-white solid. Yield: 75 g.

후처리

  1. customequipped with a condenser and guard tube
  2. temperaturemaintained at that temperature for about 21 hours
  3. temperatureThe mass is cooled to 58° C.
  4. temperaturethe mass is maintained at 78° C. for about 6 hours
  5. customThe solvent is evaporated under reduced pressure
  6. customThe compound obtained
  7. extractionextracted with ethyl acetate (2×500 mL)
  8. dry with materialThe combined organic layer is dried over anhydrous sodium sulphate (50 g)
  9. concentrationconcentrated under reduced pressure
  10. customto give solid
  11. temperaturethe mixture is cooled to −10° C.
  12. stirringstirred for 20 minutes
  13. customThe formed solid is separated by filtration
  14. washwashed with cold hexane (2×100 mL)

출처 및 근거

ORD 기록
ord-67d67212d4ea4e34a763fbbaf25bf01b
출처 데이터셋
uspto-grants-2015_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09216943B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트