C[Si](C)(C)CC[O:5]C[N:7]1[C:11]2[N:12]=[CH:13][N:14]=[C:15]([C:16]3[CH:17]=[N:18][N:19]([CH:21]([CH2:25][CH2:26][CH2:27][CH3:28])[CH2:22][C:23]#[N:24])[CH:20]=3)[C:10]=2[CH:9]=[CH:8]1.F[B-](F)(F)F.[Li+].[OH-].[NH4+]>O.C(#N)C>[NH4+:7].[OH-:5].[N:12]1[C:11]2[NH:7][CH:8]=[CH:9][C:10]=2[C:15]([C:16]2[CH:17]=[N:18][N:19]([CH:21]([CH2:25][CH2:26][CH2:27][CH3:28])[CH2:22][C:23]#[N:24])[CH:20]=2)=[N:14][CH:13]=1Into a 500 mL round bottom flask fitted with stir bar, condenser and nitrogen inlet was charged acetonitrile (58 mL), water (5.0 mL), 3-[4-(7-{[2-(trimethylsilyl)ethoxy]methyl}-7H-pyrrolo[2,3-d]pyrimidin-4-yl)-1H-pyrazol-1-yl]heptanenitrile (2nd peak from chiral separation in step 2, 3.50 g, 8.24 mmol), and lithium tetrafluoroborate (7.88 g, 82.4 mmol). The mixture was warmed to reflux overnight. To the reaction mixture was charged 7.2 M of ammonium hydroxide in water (4.3 mL, 31 mmol) in portions over a period of 5 minutes at room temperature adjusting pH to 9-10. The resulting reaction mixture was stirred for 2 hours at room temperature. Solid was removed by filtration and the filtrate was purified on RP-HPLC (XBridge column C18, 30×100 mm 5 μM; with injection volume 5 mL and flow rate 60 mL/min; at a gradient of water and acetonitrile and 0.15% NH4OH) to give desired product (1.79 g, 74%). LCMS calculated for C16H19N6(M+H)+: m/z=295.2. Found: 295.2.
불러오는 중…