홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Azide → Farampator

HRID 1581511
인쇄

반응식

HRID 1581511 반응식
Cl[C:2]1[CH:15]=[CH:14][C:5]([C:6]([N:8]2[CH2:13][CH2:12][CH2:11][CH2:10][CH2:9]2)=[O:7])=[CH:4][C:3]=1[N+:16]([O-:18])=O.[N-:19]=[N+]=[N-].[Na+]>C(O)CO>[N:19]1[O:18][N:16]=[C:3]2[CH:4]=[C:5]([C:6]([N:8]3[CH2:13][CH2:12][CH2:11][CH2:10][CH2:9]3)=[O:7])[CH:14]=[CH:15][C:2]=12
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 33557Sodium Azide2회HCID 7590631-(4-Chloro-3-nitrobenzoyl)piperidine

생성물 1

HCID 4118151Farampator수율 74.7%

시약·촉매·용매 1

HCID 174Ethylene Glycol용매

반응 조건

온도
50 °C

실험 절차

4-Chloro-3-nitro-benzoylpiperidine (539.2 g, 2.00 mol) was dissolved in 2.93 L ethylene glycol in a 5-L flask with stirring and heating to 50° C. To this solution, sodium azide (137.0 g, 2.10 moles) was added in portions over 40 min. When the addition was complete, the temperature was increased to 120° C. during 2.5 hr and maintained at this temperature for 3 hr. The solution was allowed to cool to 50° C., at which time additional sodium azide (65.3 g, 1.00 moles) was added over 5 min. The temperature was increased to 120° C. during 2.5 hr and maintained at this temperature for 4.5 hr until gas evolution had ceased. The solution was allowed to cool to room temperature, at which time the mixture was partitioned between water and ethyl acetate (1.5 L each). The aqueous phase was extracted three times with ethyl acetate (300 mL). The combined organic phases were washed with 30 mL water, twice with saturated NaCl (200 mL), and finally dried over anhydrous Na2SO4. The filtered solution was evaporated to yield 345.5 g of crude 1-(benzofurazan-5-ylcarbonyl)piperidine.

후처리

  1. additionWhen the addition
  2. temperaturethe temperature was increased to 120° C. during 2.5 hr
  3. temperaturemaintained at this temperature for 3 hr
  4. additionwas added over 5 min
  5. temperatureThe temperature was increased to 120° C. during 2.5 hr
  6. temperaturemaintained at this temperature for 4.5 hr until gas evolution
  7. temperatureto cool to room temperature, at which time the mixture
  8. customwas partitioned between water and ethyl acetate (1.5 L each)
  9. extractionThe aqueous phase was extracted three times with ethyl acetate (300 mL)
  10. washThe combined organic phases were washed with 30 mL water, twice with saturated NaCl (200 mL)
  11. dry with materialfinally dried over anhydrous Na2SO4
  12. customThe filtered solution was evaporated

출처 및 근거

ORD 기록
ord-8ea1cf0e3e2845a0a52ec3e18d6ccc6e
출처 데이터셋
uspto-grants-2004_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06730677B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트