Sodium Tetradecyl Sulfate → Benzene, ethenyl-, polymer with 1,3-butadiene

HRID 1603400

반응식

HRID 1603400 반응식
[CH3:1][CH2:2][CH2:3][CH2:4][CH:5]([CH2:8][CH2:9][CH:10](OS([O-])(=O)=O)[CH2:11][CH:12]([CH3:14])C)[CH2:6]C.[Na+]>O>[CH2:1]=[CH:2][CH:3]=[CH2:4].[CH2:14]=[CH:12][C:11]1[CH:6]=[CH:5][CH:8]=[CH:9][CH:10]=1

참가 물질

3

반응물 1

HCID 23665772Sodium Tetradecyl Sulfate

생성물 1

HCID 62697Benzene, ethenyl-, polymer with 1,3-butadiene

시약·촉매·용매 1

HCID 962Water용매

실험 절차

The material was prepared by dispersing 0.80 g Tergitol TMN-06 in 1481 g deionized water with an air mixer. To this was then added 1159 g of ground crystalline silicotitanate (150 g, 13.0% solids) (IONSIV IE 910) with agitation. Slowly to this was added 150.1 g Goodrite 1800×73 (39% solids, 58.5 g) with stirring. This mixture was mixed for 1 hour with an air mixer. The slurry was spray dried using a Niro Atomizer, (Serial number #2402) at 35 mL/min. Spray drying conditions were as follows:

후처리

  1. customThe material was prepared
  2. additionThis mixture was mixed for 1 hour with an air mixer
  3. customdried
  4. customSpray drying conditions

출처 및 근거

ORD 기록
ord-e2d357fa244044eeb976b4fe3b6f5260
출처 데이터셋
uspto-grants-1999_11
특허 번호
US05989434

연결된 노트

불러오는 중…