홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

M-Xylene → Methyl isobutyrate

HRID 1604053
인쇄

반응식

HRID 1604053 반응식
[H][H].[CH3:3][CH:4]1[CH2:9][CH2:8][O:7][C:5]1=[O:6].C1(C)C=CC=C(C)C=1>[Cu].[Cr]([O-])([O-])=O.CO>[CH3:3][CH:4]1[CH2:9][CH2:8][O:7][CH2:5]1.[CH3:3][CH:4]1[CH2:9][CH2:8][O:7][C:5]1=[O:6].[C:5]([O:7][CH3:8])(=[O:6])[CH:4]([CH3:9])[CH3:3]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 3

HCID 7929M-XyleneHCID 98323alpha-MethylbutyrolactoneHCID 178418361HCID 178418361, 화합물2회

생성물 3

HCID 11039Methyl isobutyrate수율 0.5%HCID 982303-MethyltetrahydrofuranHCID 98323alpha-Methylbutyrolactone

시약·촉매·용매 2

HCID 178505379
HCID 178505379, 화합물
촉매
HCID 887Methanol용매

실험 절차

A stainless steel-made tubular reactor to be used as a hydrogenation reactor having an inside diameter of 15 mm and a length of 300 mm was packed inside with 10 g of copper-chromite as the catalyst roughly uniformized in particle size of 10 to 20 mesh (produced by Nissan Girdler Catalyst Co.,Ltd. under the trade name: G-99C in the form of pellets). Subsequently, a catalyst reduction was carried out at 150 to 200° C. by passing through the reactor, hydrogen gas diluted with nitrogen to 0.5 to 5% by volume by the conventional method with sufficient care not to form a hot spot. Thereafter, the feed gas to the reactor was switched to pure hydrogen at a pressure of 70 kg/cm2G, a purge gas SV of 500 hr-1 and a catalyst bed temperature of 230° C. Then, the tubular reactor was charged at an upper portion thereof with a starting material for reaction consisting of a solution of 30 parts by weight of 2-methyl-γ-butyrolactone which had been obtained in Example 3 in 70 parts by weight of m-xylene at a rate of 3.3 g per hour. The effluent through a lower portion thereof was cooled and degasified to collect the reaction product. After the lapse of 5 hours from the start of the reaction, the reaction product was collected for one hour and analyzed by gas chromatography. As a result, the objective 3-methyltetrahydrofuran was obtained in a yield of 90.1% in a conversion efficiency of 2-methyl-γ-butyro-lactone of 100% in a yield of 0.5% methyl isobutyrate, while methanol was not detected in the reaction product throughout the reaction period.

후처리

  1. customto be used as a hydrogenation reactor
  2. customproduced by Nissan Girdler Catalyst Co.,Ltd
  3. customwas carried out at 150 to 200° C.
  4. additiondiluted with nitrogen to 0.5 to 5% by volume by the conventional method with sufficient care not
  5. customto form a hot spot
  6. customa purge gas SV of 500 hr
  7. customa catalyst bed temperature of 230° C
  8. additionThen, the tubular reactor was charged at an upper portion
  9. customwith a starting material for reaction
  10. temperatureThe effluent through a lower portion thereof was cooled
  11. customto collect the reaction product
  12. customAfter the lapse of 5 hours from the start of the reaction
  13. customthe reaction product was collected for one hour

출처 및 근거

ORD 기록
ord-c6a9a9157ea04a77964b7b42475a926d
출처 데이터셋
uspto-grants-1999_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05990324

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트