홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Bicarbonate → (E)-3-(2-(pyridin-3-yl)vinyl)-1H-indazole-6-carbonitrile

HRID 1615210
인쇄

반응식

HRID 1615210 반응식
[N:1]1[CH:6]=[CH:5][CH:4]=[C:3]([CH2:7]P(=O)(OCC)OCC)[CH:2]=1.C(O[K])(C)(C)C.[CH:22]([C:24]1[C:32]2[C:27](=[CH:28][C:29]([C:33]#[N:34])=[CH:30][CH:31]=2)[NH:26][N:25]=1)=O.C([O-])(O)=O.[Na+]>CN(C=O)C.O>[N:1]1[CH:6]=[CH:5][CH:4]=[C:3](/[CH:7]=[CH:22]/[C:24]2[C:32]3[C:27](=[CH:28][C:29]([C:33]#[N:34])=[CH:30][CH:31]=3)[NH:26][N:25]=2)[CH:2]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 516892Sodium BicarbonateHCID 104626053-(Diethoxyphosphorylmethyl)pyridineHCID 178418922HCID 178418922, 화합물HCID 178509486HCID 178509486, 화합물

생성물 1

HCID 66734132(E)-3-(2-(pyridin-3-yl)vinyl)-1H-indazole-6-carbonitrile수율 67%

시약·촉매·용매 2

HCID 962
Water
용매
HCID 6228Dimethylformamide용매2회

반응 조건

온도
0 °C

실험 절차

Diethyl pyridin-3-ylmethylphosphonate was redissolved in DMF (50 mL), cooled to 0° C. and treated with tBuOK (6.72 g, 60 mmol) portion wise over 3 min; the reaction turned a dark reddish brown. After stirring for 3 min at 0° C., a solution of 3-formyl-1H-indazole-6-carbonitrile (3.42 g, 20 mmol) in DMF (25 mL) was added dropwise by pipette over 5 min. After addition, the resulting mixture was stirred for 1 h at 0° C. before quenching with ice (100 mL). The reaction mixture was cooled to 0° C. and slowly acidified with 2M HCl until pH 5. During this addition, a copious amount of precipitate was formed. After stirring for 2 min at this temperature, sat NaHCO3 was added slowly until pH 8 and the mixture was stirred for an additional 2 min. Water was added until the total volume reached 600 mL. After stirring for 10 min, the resulting precipitate was collected by suction filtration and rinsed thoroughly with water, then dried under high vacuum to give the title compound (3.30 g, 67%) as a beige solid. 1H NMR (400 MHz, DMSO-d6) δ 13.80 (s, 1H, NH), 8.89 (s, 1H), 8.48 (d, J=4.4 Hz, 1H), 4.42 (d, J=8.4 Hz, 1H), 8.22-8.17 (m, 2H), 7.74 (d, J=16.8 Hz, 1H), 7.59 (d, J=18.0 Hz, 1H, partially overlapping with the doublet at 7.55 ppm), 7.55 (d, J=10.0 Hz, 1H, partially overlapping with the doublet at 7.59 ppm), 7.43 (dd, J=8.0 Hz, 5.6 Hz, 1H); MS ESI 247.0 [M+H]+, calcd for [C15H10N4+H]+ 247.1.

후처리

  1. additionAfter addition
  2. stirringthe resulting mixture was stirred for 1 h at 0° C.
  3. custombefore quenching with ice (100 mL)
  4. temperatureThe reaction mixture was cooled to 0° C.
  5. additionDuring this addition
  6. customa copious amount of precipitate was formed
  7. stirringAfter stirring for 2 min at this temperature
  8. additionwas added slowly until pH 8
  9. stirringthe mixture was stirred for an additional 2 min
  10. stirringAfter stirring for 10 min
  11. filtrationthe resulting precipitate was collected by suction filtration
  12. washrinsed thoroughly with water
  13. customdried under high vacuum

출처 및 근거

ORD 기록
ord-53f424a8570a43188ca65cabf3acdbdd
출처 데이터셋
uspto-grants-2014_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08765748B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트