홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

4-(Morpholinomethyl)benzene-1,2-diamine → HCID 178526864, 화합물

HRID 1622419
인쇄

반응식

HRID 1622419 반응식
[N:1]1([CH2:7][C:8]2[CH:9]=[C:10]([NH2:15])[C:11]([NH2:14])=[CH:12][CH:13]=2)[CH2:6][CH2:5][O:4][CH2:3][CH2:2]1.[N+:16]([C:19]1[C:20]([C:24](O)=O)=[N:21][NH:22][CH:23]=1)([O-:18])=[O:17]>CN(C)C=O>[N:1]1([CH2:7][C:8]2[CH:13]=[CH:12][C:11]3[NH:14][C:24]([C:20]4[C:19]([N+:16]([O-:18])=[O:17])=[CH:23][NH:22][N:21]=4)=[N:15][C:10]=3[CH:9]=2)[CH2:6][CH2:5][O:4][CH2:3][CH2:2]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 251933094-(Morpholinomethyl)benzene-1,2-diamineHCID 178524956HCID 178524956, 화합물

생성물 1

HCID 178526864HCID 178526864, 화합물수율 40%

시약·촉매·용매 1

HCID 6228Dimethylformamide용매

반응 조건

온도
65 °C

실험 절차

4-Morpholin-4-ylmethyl-benzene-1,2-diamine (1 mol. eq.) and 4-nitro-1H-pyrazole-3-carboxylic acid (1 mol. eq.) were dissolved in dimethylformamide (DMF) (10 vol.). O-(Benzot πazol-1-yl)-N,N,N′,N1-tetramethyluronium tetrafluoroborate (TBTU) (1.2 mol. eq.) was added and the mixture was stiffed at ambient temperature for 24 hours. The mixture was concentrated in vacuo until no further solvent was seen to distil. The residue was then dissolved in glacial acetic acid (10 vol.) and heated at 65° C. for ˜12 hours. The mixture was concentrated in vacuo and then dissolved in water (6 vol.) at 75° C. The black solution was cooled to 0-5° C. over 2 hours during which time a solid was formed. The solid was removed by filtration and the aqueous filtrate was diluted with ethyl acetate (4 vol.) and tetrahydrofuran (2 vol.). Solid NaHCO3 was added slowly to the stirred mixture until no further effervescence was observed and a pII of 6.8 was reached. The mixture was then stirred until a precipitation was observed. After standing the mixture at 0-5° C. for 2 hours, the solid was collected by filtration and washed with water (2 vol.) and ethyl acetate (2 vol.) and dried to give 5-morpholin-4-ylmethyl-2-(4-nitro-1H-pyrazol-3-yl)1H-benzimidazole as a brown solid (40%). (LC/MS (basic method): Rt 1.93, [M−H+]− 327).

후처리

  1. concentrationThe mixture was concentrated in vacuo until no further solvent
  2. customto distil
  3. dissolutionThe residue was then dissolved in glacial acetic acid (10 vol.)
  4. concentrationThe mixture was concentrated in vacuo
  5. dissolutiondissolved in water (6 vol.) at 75° C
  6. temperatureThe black solution was cooled to 0-5° C. over 2 hours during which time a solid
  7. customwas formed
  8. customThe solid was removed by filtration
  9. additionthe aqueous filtrate was diluted with ethyl acetate (4 vol.) and tetrahydrofuran (2 vol.)
  10. additionSolid NaHCO3 was added slowly to the stirred mixture until no further effervescence
  11. customat 0-5° C.
  12. customfor 2 hours
  13. filtrationthe solid was collected by filtration
  14. washwashed with water (2 vol.) and ethyl acetate (2 vol.)
  15. customdried

출처 및 근거

ORD 기록
ord-91566ba2214543f289cc2370b623e260
출처 데이터셋
uspto-grants-2014_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08778936B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트