홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Cesium carbonate → (3-(4-(2-Oxa-6-azaspiro[3.3]heptan-6-ylmethyl)-3-chlorophenoxy)azetidin-1-yl)(5-phenyl-1,3,4-oxadiazol-2-yl)methanone

HRID 1639500
인쇄

반응식

HRID 1639500 반응식
[CH2:1]1[C:4]2([CH2:7][N:6]([CH2:8][C:9]3[CH:14]=[CH:13][C:12]([OH:15])=[CH:11][C:10]=3[Cl:16])[CH2:5]2)[CH2:3][O:2]1.CS(O[CH:22]1[CH2:25][N:24]([C:26]([C:28]2[O:29][C:30]([C:33]3[CH:38]=[CH:37][CH:36]=[CH:35][CH:34]=3)=[N:31][N:32]=2)=[O:27])[CH2:23]1)(=O)=O.C([O-])([O-])=O.[Cs+].[Cs+]>CN(C=O)C>[CH2:3]1[C:4]2([CH2:5][N:6]([CH2:8][C:9]3[CH:14]=[CH:13][C:12]([O:15][CH:22]4[CH2:23][N:24]([C:26]([C:28]5[O:29][C:30]([C:33]6[CH:38]=[CH:37][CH:36]=[CH:35][CH:34]=6)=[N:31][N:32]=5)=[O:27])[CH2:25]4)=[CH:11][C:10]=3[Cl:16])[CH2:7]2)[CH2:1][O:2]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 10796Cesium carbonateHCID 580430991-(5-Phenyl-1,3,4-oxadiazole-2-carbonyl)azetidin-3-yl methanesulfonateHCID 595635044-(2-Oxa-6-azaspiro[3.3]heptan-6-ylmethyl)-3-chlorophenol

생성물 1

HCID 49801539(3-(4-(2-Oxa-6-azaspiro[3.3]heptan-6-ylmethyl)-3-chlorophenoxy)azetidin-1-yl)(5-phenyl-1,3,4-oxadiazol-2-yl)methanone수율 44.5%

시약·촉매·용매 1

HCID 6228
Dimethylformamide
용매

반응 조건

온도
90 °C

실험 절차

1A (0.30 g, 1.25 mmol) was dissolved in dry DMF (10 mL) and 1C (0.61 g, 1.88 mmol) was added followed by Cs2CO3 (0.82 g, 2.50 mmol). The reaction mixture was stirred at 90° C. for 24 h. The mixture was filtered and approximately half the volume of solvent was evaporated. The product was purified by preparative RP HPLC (gradient: 15-55% acetonitrile over 30 min, 0.2% ammonia buffer). The pure fractions were combined and concentrated. Dichloromethane was added and the solution was dried (phase separator) and concentrated in vacuo. There was obtained 0.26 g (44.5%) of 1 as a solid. 1H NMR (500 MHz, CDCl3): δ 3.57 (s, 4H), 3.73 (s, 2H), 4.33 (d, 1H), 4.65 (dd, 1H), 4.73 (m, 1H), 4.77 (s, 4H), 5.06 (m, 1H), 5.14 (dd, 1H), 6.70 (d, 1H), 6.80 (s, 1H), 7.37 (m, 1H), 7.54 (m, 2H), 7.59 (m, 1H), 8.16 (d, 2H), MS (APCI+) m/z 467 [M+H]+. LC purity: 96%. A slurry experiment was performed by weighing 2.5 mg of Example 1 into a vial and adding ethanol (100 μL). The slurry was shaken for 7 days at ambient temperature and then crystals were collected using a small spatula. The crystals were dried in a hood for one hour and then analyzed using DSC (differential scanning calorimetry). A sample was weighed into an aluminium pan with a pierced lid and heated from 0° C. to 300° C. with a ramp of 5° C./min and modulated with the amplitude of ±0.6° C. every 45 seconds. The instrument was purged with nitrogen at 50 mL/minute; melting point 119±5° C.

후처리

  1. filtrationThe mixture was filtered
  2. customapproximately half the volume of solvent was evaporated
  3. customThe product was purified by preparative RP HPLC (gradient: 15-55% acetonitrile over 30 min, 0.2% ammonia buffer)
  4. concentrationconcentrated
  5. additionDichloromethane was added
  6. customthe solution was dried (phase separator)
  7. concentrationconcentrated in vacuo

출처 및 근거

ORD 기록
ord-07ea3f4e3f3c412fa2257c0e0339145a
출처 데이터셋
uspto-grants-2012_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08110566B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트