Methane → Chlorodiphenylphosphine

참여 물질

반응 조건

반응 단계

A mixture of diphenylphosphinous chloride, 7.0 grams, 0.03 moles, and calcium carbide, 2.0 grams, 0.038 moles is vigorously stirred for 22 hours under a nitrogen atmosphere and at a temperature of about 160° C., care being taken to avoid oxygen and moisture contamination. The hot mixture is cooled to room temperature and mixed with dry toluene, 60 ml, at 100° C. Charcoal is then added to the solution, which is filtered while hot. The toluene is removed by evaporation using a rotary evaporator, leaving crude tetraphenyldiphosphine and unreacted diphenylphosphinous chloride. Dry ether, 60 ml, is added to the mixture to precipitate the tetraphenyldiphosphine. The solids are isolated by filtration and washed with dry, cold ether three times in order to remove any unreacted diphenylphosphinous chloride, and the remaining solids are dried in vacuo at room temperature. The product is then treated with 1 percent aqueous KOH solution and washed three times with distilled water, three times with dry ether, and then vacuum dried at 35° C. for 24 hours. The yield is 7.4 grams, 63 percent. The product is characterized by its melting point, measured as 120° C., which is in good agreement with the melting point, 120.5° C., obtained from the literature. An infrared spectrum of the product is obtained which is found to be identical to an infrared spectrum of tetraphenylbiphosphine obtained from the literature, confirming the structure of the product obtained.

출처 및 근거