홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Stearic Acid → Cyclododeca-1,3,5-triene

HRID 1656849
인쇄

반응식

HRID 1656849 반응식
[CH:1]1[CH2:12][CH2:11][CH:10]=[CH:9][CH2:8][CH2:7][CH:6]=[CH:5][CH2:4][CH2:3][CH:2]=1.C(O)(=O)CCCCCCCCCCCCCCCCC.[OH-].[K+]>O>[CH:5]1[CH2:6][CH2:7][CH2:8][CH2:9][CH2:10][CH2:11][CH:12]=[CH:1][CH:2]=[CH:3][CH:4]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 5281Stearic Acid2회HCID 126681,5,9-Cyclododecatriene2회HCID 14797Potassium Hydroxide

생성물 1

HCID 53421619Cyclododeca-1,3,5-triene

시약·촉매·용매 1

HCID 962Water용매2회

실험 절차

A 600 mL beaker was charged with 150 g deionized water, 100 g of 91% pure 1,5,9-cyclododecatriene and 5.0 g of stearic acid. The resulting mixture was heated to 75°-80° C. to melt stearic acid and was intensively mixed at this temperature using a high shear Tekmar agitator while adding sufficient 50% aq. KOH to raise the pH to 10.5-11.0. The emulsion was cooled to room temperature and allowed to stand overnight. (Note: density differences between bulk water and emulsified particles caused some separation overnight, but gentle mixing again gave a uniform emulsion). The final emulsion contained 39.2 percent 1,5,9-cyclododecatriene (I) by weight.

후처리

  1. additionA 600 mL beaker was charged with 150 g
  2. temperatureThe resulting mixture was heated to 75°-80° C.
  3. additionwas intensively mixed at this temperature
  4. temperatureto raise the pH to 10.5-11.0
  5. customsome separation overnight
  6. additiongentle mixing again
  7. customgave a uniform emulsion)

출처 및 근거

ORD 기록
ord-4641f6233658400fa8dd804992806993
출처 데이터셋
uspto-grants-1993_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05254761

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트